Fishing rod storage

[Ex Euro Driver]

I don’t have a choice. I have to break down and store under the rear seats. 10 foot fly rods.....

 

[Drgracin72]

I know this is an old thread, but I've got 2 of these rod holders on top of my truck for my 10 foot nymphing fly rods. I also have a a 7 spot holder on the inside that holds the rod across the rooftop. I'm 6'4" and don't have an issue with 9 foot fly rods tapping my head. I can fit a 10 foot rod inside, but it will rest against the glass a little bit. In all, I have the ability to carry 11 fully rigged and ready to fish setups at any time.

Sent from my SM-N960U using Tapatalk

 

[Drgracin72]

Here are the photos

Sent from my SM-N960U using Tapatalk

 

[992dr]

Here are the photos View attachment 227167View attachment 227169

Sent from my SM-N960U using Tapatalk

That is very cool.

Do you have a link or name of that holder?
Can you tighten it up so it doesn't sag as much?

Thanks for sharing

 

[Drgracin72]

yes, you can tighten it up. i just looked for a rod holder on amazon. it was like $15

 

[Drgracin72]

and thats about as tight as i can get it. the angle of the picture makes it look worse than it is.fully loaded with 7 rods, it might sag an inch. I did put self tapping screws into the rear hanger to keep them from slipping off. only part of it thats not a simple plug and play.

 

[992dr]

Cool, I'll go search around amazon and see what I can find.

Thanks for the info

 

[Drgracin72]

This is the same one linked earlier in the thread from basspro. It works well. This is how I attached it in my suburban.

Sent from my SM-N960U using Tapatalk

 

[992dr]

That's cool, easy enough.
Gotcha, now I have an idea of how it mounts.

 

[Josiah_M]

This is an old post but there is a solution through www.ModTrak.com
07-14 is available and is multi-purpose t-slot construction. No vehicle mods.
FB post states the 2021-Present system is coming soon https://www.facebook.com/share/p/uZx2VEBop1sBPr7i/