Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
I was thinking of doing some different housings and use Hids , not sure which ones yet. Or a sealed led light. Like an off road led light behind the bumper in the hole.
Felix, do you get enough light concentrated down low on the road or does it reflect out in front of the truck? I like the downfiring LED lights but not sure the reflector bowl is the right solution. Thanks.
A whole lot of light is concentrated down low but I do get some light above my projector HID cut off. Overall really helps me drive down dark country roads. Really worth the 80-90 I spent on the pair.
---------- Post added at 07:25 PM ---------- Previous post was at 07:23 PM ----------
Yea the reflector bowl was built for an incandescent bulb I agree. Only other option id do on fogs is get a mini projector retrofitted in the factory fog housing and run 25w ballasts.
Yes definitely worth it. I'm always on dark high ways and country roads with no lights and I need every bit of light I can get. My headlights have HID projectors with 35w Morimoto ballasts so that with these led fogs I'm finally happy with the amount of light output im getting.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.