Front seats swap possibility

[dang74]

I just went into the site, unless you have the oak color seat it's not available in the OEM style. I have the light color leather and it shows that they have it in OEM style. My bad that it doesn't have it. I just wanted to show you that site cause it can save you some money just replacing the foam and leather. Yea you will have to take the seat out and take it it apart. Hope you find what you're looking for.

Sent from my SM-G955U using Tapatalk

 

[OR VietVet]

I see the OEM leather/vinyl option in every color for the 2002.

I saw the option too but as soon as you click on the far right tan color it only shows all vinyl for that color.

 

[OR VietVet]

I just went into the site, unless you have the oak color seat it's not available in the OEM style. I have the light color leather and it shows that they have it in OEM style. My bad that it doesn't have it. I just wanted to show you that site cause it can save you some money just replacing the foam and leather. Yea you will have to take the seat out and take it it apart. Hope you find what you're looking for.

Sent from my SM-G955U using Tapatalk

I do know a guy that works at an upholstery shop and does this type of work. I am going to see him and get a quote. I have seen his work and talked to others and he does quality work.

 

[Rocket Man]

I saw the option too but as soon as you click on the far right tan color it only shows all vinyl for that color.

Try Richmond Auto Upholstery they have tan and grey. I’m pretty sure you need shale anyway which is a tan and they both have it.
https://leather-auto-seats.com/prod.../tahoesuburban/page/2/?filter_model-year=2002

 

[OR VietVet]

Ok, went to the local upholstery shop yesterday and they looked at the driver's seat problem I have. He then showed my why the seat also has some movement on the driver's side of the seat when flex it. There is a seat pan in there that is known for cracking and causing this movement. They weld it to fix, will do a complete new all leather, not vinyl sides, weld the seat pan and replace the foam for $300. I have had work done there before and I like them a lot. Pics will be sent out.

 

[Rocket Man]

Ok, went to the local upholstery shop yesterday and they looked at the driver's seat problem I have. He then showed my why the seat also has some movement on the driver's side of the seat when flex it. There is a seat pan in there that is known for cracking and causing this movement. They weld it to fix, will do a complete new all leather, not vinyl sides, weld the seat pan and replace the foam for $300. I have had work done there before and I like them a lot. Pics will be sent out.

That’s a great price. Most places sell the leather piece for that much.

 

[OR VietVet]

Yea, I felt it was more than fair plus I know they do it right. I am starting to get parts in for the other upgrades I am planing. Received the Corvette servo today as well as the trans filter and gasket and seal, AC Delco. New chrome section of bumper supposed to be here within 2 days. After all this is done the exhaust is next.

 

[iddqd]

I myself saw an NBS Silverado with NNBS seats and center console. The seats were manual. For the power seats, it depends. It is definitely possible, if there's no memory option. If there is, it might be difficult.

 

[OR VietVet]

I am picking up my Tahoe in about an hour. The drivers seat bottom is being completely redone.

 

[OR VietVet]

Just got my 2002 Hoe back yesterday. The seat bottom vinyl has been replaced with leather and the metal seat pan was removed and welded and new foam installed. Way better feel and look now. The passenger front seat is in great shape.