LGSONE
Full Access Member
- Joined
- Dec 30, 2015
- Posts
- 176
- Reaction score
- 40
So I'm about to pull the trigger on the Audison AP8.9Bit DSP/Amp 35x8 and do a full Active speaker setup. I need to verify speaker sizing.
Speaker Setup:
Front Dash, tweaters or 3 1/2"
Front Doors, Mid Bass 6 1/2" 6 3/4" or 6x9?
Rear Doors, Coaxial 6 1/2" 6 3/4" or 6x9?
Rear Pillars, tweaters or 3 1/2"
Sub JL passive box powered by outboard amp
Problem is what the heck are the speaker sizes, Crutchfield and Sonic don't even know.
It is the 9 speaker "Bose" system and the factory amp has 6 channels out. I thing the rear pillars and rear doors are wired in parallel. The AP8.9Bit has high level in and de-equalization for the inputs and configurable outputs.
I need a harness to come off the Bose amp into high level inputs and then a second harness to go into the factory cabling to the speakers from the amp outputs. I think I can get close with a Metra piece but i wanted to check to see if anyone here has another option.
Since the Bose amp has a MOST input stage I have to leave it in place as no convertor for MOST and GM-LAN29 exist. This is fine so it does not effect any of the factory chimes, traffic alerts, onstar, etc...
Does anyone have definitive answers to speaker sizes...
Only thing I wish was available with a JL stealthbox or MTX version... none yet.
It is surprising to see such spare information available for this new body style. Sorry for all the questions but before I tear apart a truck with barely 1000 miles on it I'd like to know so I can start and finish instead of chasing down quality gear.
LGSONE
Speaker Setup:
Front Dash, tweaters or 3 1/2"
Front Doors, Mid Bass 6 1/2" 6 3/4" or 6x9?
Rear Doors, Coaxial 6 1/2" 6 3/4" or 6x9?
Rear Pillars, tweaters or 3 1/2"
Sub JL passive box powered by outboard amp
Problem is what the heck are the speaker sizes, Crutchfield and Sonic don't even know.
It is the 9 speaker "Bose" system and the factory amp has 6 channels out. I thing the rear pillars and rear doors are wired in parallel. The AP8.9Bit has high level in and de-equalization for the inputs and configurable outputs.
I need a harness to come off the Bose amp into high level inputs and then a second harness to go into the factory cabling to the speakers from the amp outputs. I think I can get close with a Metra piece but i wanted to check to see if anyone here has another option.
Since the Bose amp has a MOST input stage I have to leave it in place as no convertor for MOST and GM-LAN29 exist. This is fine so it does not effect any of the factory chimes, traffic alerts, onstar, etc...
Does anyone have definitive answers to speaker sizes...
Only thing I wish was available with a JL stealthbox or MTX version... none yet.
It is surprising to see such spare information available for this new body style. Sorry for all the questions but before I tear apart a truck with barely 1000 miles on it I'd like to know so I can start and finish instead of chasing down quality gear.
LGSONE