Getting the Ride Back

[Max]

Just wait until they settle, you'll be happy. My truck has spindles + keys cranked all the way for about 4.5" drop up front and my tires are about an inch shorter at 30.25" overall, rear is probably close to 6" of drop with 20psi in the bags right now. Just drive it for a bit, I think you'll be stoked once you give them time to settle homie.

 

[NORCAL SS]

with djm front a arms and the tb rear springs you will have that cali lean babyyy

 

[bub]

Just wait until they settle, you'll be happy. My truck has spindles + keys cranked all the way for about 4.5" drop up front and my tires are about an inch shorter at 30.25" overall, rear is probably close to 6" of drop with 20psi in the bags right now. Just drive it for a bit, I think you'll be stoked once you give them time to settle homie.

ok man. hopefully they settle some more to where i want. thanks dood.

 

[Max]

Just be patient homie, took me 3 years to get my truck to this point.

 

[Nickleahy23]

ok man. hopefully they settle some more to where i want. thanks dood.

are you running the stock spring isolators or are you running them without?

 

[bub]

are you running the stock spring isolators or are you running them without?

what are those? the rubber pads that sit on the top and the bottom of the springs? if so, yes i have them in there.

 

[Nickleahy23]

what are those? the rubber pads that sit on the top and the bottom of the springs? if so, yes i have them in there.

ya those are it...you will sit a little lower without them, not sure how much though..thats how max set mine up the frist time, and i did the same way this time..

 

[Max]

They'll drop it about 1/4" to 1/2", pull those ******* out they don't help anything...my coils have never squeaked.

 

[bub]

good to know. thanks guys. pull them out as in all 4? both top and bottom?

 

[Max]

Yup, both top and bottom. PM me your # over here or on gmfs as I usually have my phone on me if you have any questions