Help! 96 tahoe camber correction kit

[black95]

i found out that i need to do upper ball joints in my truck, but since i have backed out my torsion keys i have not been able to get my negative camber corrected. i need a bolt kit that will correct the camber , becuz i figured i will fix this issue along with the ball joints, so i can get a proper alignment

links or part numbers would be appreciated

 

[AtomicHoe094]

i just went to the local auto store and they hooked me up with some new shit.. go with anything with a grease zerk.. moog, masterpro, etc etc

have fun grinding down the rivets if they haven't been replaced before. Just did the upper and lowers a couple weeks ago on mine.. Uppers are riveted in, the lowers youll need a press..

 

[foreverfalcon40]

i just went to the local auto store and they hooked me up with some new shit.. go with anything with a grease zerk.. moog, masterpro, etc etc

have fun grinding down the rivets if they haven't been replaced before. Just did the upper and lowers a couple weeks ago on mine.. Uppers are riveted in, the lowers youll need a press..

I thought all Aftermarket BJ come with grease fittings?

Its either MOOG...high end stuff. Or Falcon from Auto Barn which is the shit. Had mine for a almost a year, keep them greased as soon as I hear a squeak work like a champ. Even with the 22's. So far thier suspension parts for the cost is A-OK with me. Next time they go I will splurge.

Cam bolt can be had Auto-Zone?

 

[black95]

they are not the originals lucky me!

 

[AtomicHoe094]

im sure some shit doesnt come with them, but just dont get them like mentioned!

cam bolts, doesn't stylin trucks even sell them.

 

[black95]

i couldnt find any

 

[foreverfalcon40]

What about LMC...worst come to worst...call the hot line

 

[SunlitComet]

alignment correction kits can be had at just about any autozone, oreily.......

---------- Post added at 05:11 AM ---------- Previous post was at 05:04 AM ----------

try maybe Eibach Springs - Caster/Camber Kit
Part Number: 5.87400K
for the 2wd systems

 

[black95]

u think the 2wd kit will work in the 4wd?

 

[SunlitComet]

Are you sure you don't have them already? Round plates with the thru-bolt off center?

At any rate they look the same for 4*2 4*4 but here is a link to a southern Cali dealer for the 4*4 kit.

Not sure if it is for both side or one though.

http://www.gmpartsgiant.com/parts/gm-cam-kit-15637049.html