Not a problem. You can wire it either way. @4 ohms you will get about half of the power from the amp @2 ohms youll get full power from amp. The sub will take it either way you wire it. Just get quality wiring and rcas.
Help! Don't know what kind of sub to buy
- Thread starter Milkyyukon
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
Milkyyukon
TYF Newbie
Cool thx again
That sub can only be wired at 2 ohms or 8 ohms do 2 ohm to get the most out of your amp. Also you just can't your gain to half way and be ok. It depends on what volts your preouts on your deck are. Most decks send a clipping signal at max volume so I would stay at about 90% volume max and then turn the amp till u her distortion from the SUb and back it down a hair.
