help me with my fender/ground height

[02blkyukon]

I have been by a few yukons/tahoes and I swear my yukon sits lower than normal. I turned my torsion bars two times all the way around and on measurement with pretty much shot 265/70s. the front fenders are 36 1/2 from the ground and the backs are 37 3/4. i didnt make them completely level cause only had half a tank of gas. Is this the normal height? The yukon has 170k on it. I will be wanting to put 33s or even 35s on it in a few weeks.

 

[AquinoSteven]

I was at 36"s with stockers so you seem pretty good. Im at 39" now with the 305s and leveling kit

 

[PUGLIA]

Yup pretty close to where I was at. I'm at 39" as well wit the 2" keys and spacers.

 

[02blkyukon]

i am going to go with the 2" keys and spacer in the back. I saw the one that rough country has with the shocks. wish i could find a cheaper one tho. haha

 

[AquinoSteven]

The rough country kit is a pretty good deal. I got my set up for like 175 with no shocks

 

[02blkyukon]

i will probly go without the shocks too.

---------- Post added at 05:58 PM ---------- Previous post was at 04:19 PM ----------

found a kit that is 3" front and 1.25" rear for $290. anyone try this? could I fit 35s with that

 

[AquinoSteven]

It all depends on your rim combo. I rubbed like a mother with my 305s but thats because i have aftermarket rims

 

[02blkyukon]

ok I might try it with my stock chrome first. Aquino- what back spacing where your rims?

 

[AquinoSteven]

I wanna say 4.5"s

 

[02blkyukon]

Well I think I am going with some 305/70 with my stock rims. how much trimming do you guys think I will have to do? Just cranking the bars for now.