help with running 1/0GA Amp wire and also looking for G5s

[Max]

I ran 1/0 kicker easier than the 2ga JL I had before, easiest pull I've ever made

 

[Vicious00013]

ok,.. the kit is here. and it looks like its good quality. nice looking wire and very flexible. Says Raptor all over the wire and premium amp wire... no AWG. But I think it will be alright.
Im gonna eat real fast.. Then start pulling the Tahoe apart

 

[daxz1231]

i have 3 runs of 0 gauge hyper flex from front batt. i ran all three thro the cab.... 1st and 2nd wasnt too bad but the 3rd was a complete B i T C H! no joke....

 

[Vicious00013]

OK,.. its break time... well time to eat.
Heres a few pics. This is kinda makeshift until I get some wood and figure out an amp rack situation





---------- Post added at 06:28 PM ---------- Previous post was at 06:25 PM ----------

lol.. damn it... I touched the remote turn on to a ground on accident... now no radio and i checked all the fuses.. bleh.. gonna have to pull the head unit and check fuses behind it

 

[Vicious00013]

Here's another update for you guys..
Took a road trip... blew the L5s and I think that blew the Amp
Sending the amp off for repairs

 

[blueflamed03]

ouch, what kind of amp, is that the Memphis?

 

[Vicious00013]

Yes.. My beloved Memphis Belle... Already got estimates on it. I'm going to send it off to Audiotekx for repairs at the rough estimate of $120. Salvaged one of the L5s.. had to solder a wire back together on it and it working now... The other one it dead.. one voice coil does nothing and the second sizzles..lol
So now im back to a Planet Audio TT1250d while I wait for the Memphis to come back