Hi y’all! I have a 2012 Gmc Yukon xl … does anyone! Know where the remote key entry antenna is located?

[mikez71]

Another diagram that appears to show it near the rear door opening... But still driver's side rear quarterpanel...

Keyless Entry Receiver: Service and Repair — 2012 GMC Yukon XL 2WD V8-5.3L Service Manual | Operation CHARM

Detailed repair manual for the 2012 GMC Yukon XL 2WD V8-5.3L.

charm.li

 

[swathdiver]

It's on the D-Pillar below the speaker, it is called the Remote Control Door Lock Receiver, just like in the diagrams.

 

[Doubeleive]

Another diagram that appears to show it near the rear door opening... But still driver's side rear quarterpanel...

Keyless Entry Receiver: Service and Repair — 2012 GMC Yukon XL 2WD V8-5.3L Service Manual | Operation CHARM

Detailed repair manual for the 2012 GMC Yukon XL 2WD V8-5.3L.

charm.li

^^ this I have seen pictures of it on the drivers side but up farther in wheel well area behind that big panel, like up towards the 2nd row seats

 

[Mike2012yukonXl]

Thanks to y’all !! Found it and opened it up and circuit board was fried!! So going to get a new one then might be back here to see how to mate my key fob to it lol .. thank you all!! Michael

 

[Fless]

Where was it located?

 

[Mike2012yukonXl]

Rear left pillar!!

 

[Doubeleive]

Thanks to y’all !! Found it and opened it up and circuit board was fried!! So going to get a new one then might be back here to see how to mate my key fob to it lol .. thank you all!! Michael

it's going to need to be programmed to the vin and learned to the fob's, if you have more than 1 fob they need to all be done at the same time

 

[Mike2012yukonXl]

So I have to take it to the dealer to have it programmed? Yikes lol

 

[Mike2012yukonXl]

Does anyone know of a scan tool that will program my new rke and my key fobs to my Yukon? Or do I have to take it to the dealership? Thanks

 

[Joseph Garcia]

Does anyone know of a scan tool that will program my new rke and my key fobs to my Yukon? Or do I have to take it to the dealership? Thanks

After you get the new module programmed to the truck, a reputable local repair shop should be able to do at a much lower price, let them also program your fobs to your new module. Alternately, you could have a local locksmith program your fobs.