hid/projector housing

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

kses123

kses123
Joined
Jul 7, 2009
Posts
736
Reaction score
44
Location
Raleigh, NC
Going with the stock head lamps with the H.I.D conversion was so much better. I had the same problem wasting my money on ****** projectors that cant take the heat. But the stock lights i feel spread the beam much better. I have 10000K in my stock head lamps and fog lamps and they look great. Just interested in how long the fog lamps last from the heat.


These are not ****** projectors at all. Very high quality. The bracket is flimsy, but can easily be stiffened. I have been there with the crappy projectors that leak and are poorly made so I know what you mean. It's just not the case with these. They spread the light very well too. Much better than stock.
 

Bailey-Hoe!

Full Access Member
Joined
Dec 17, 2009
Posts
234
Reaction score
5
Location
Vermont
Stiffer bracket

These are not ****** projectors at all. Very high quality. The bracket is flimsy, but can easily be stiffened. I have been there with the crappy projectors that leak and are poorly made so I know what you mean. It's just not the case with these. They spread the light very well too. Much better than stock.

I agree, lights are good, and bracket is a bit more flimsy than stock. What have you done to stiffen it?

BB
 

Kristian

TYF Newbie
Joined
Jun 13, 2009
Posts
27
Reaction score
0
Location
Norway
A lil bit offtopic, but am I the only one who gets these annoying light 'dots' at top when using the depos?
 

Attachments

  • 30012010(004).jpg
    30012010(004).jpg
    98.8 KB · Views: 44

kses123

kses123
Joined
Jul 7, 2009
Posts
736
Reaction score
44
Location
Raleigh, NC
A lil bit offtopic, but am I the only one who gets these annoying light 'dots' at top when using the depos?

No, they all have those. I eliminated them because they really annoyed me. Just get some JB weld and fill in the little holes. When you take the bulb out, you can see the three little holes on the cutoff shield inside the headlight.
 

kses123

kses123
Joined
Jul 7, 2009
Posts
736
Reaction score
44
Location
Raleigh, NC
i was told the put them in so the hit above road signs

That's what they are there for. They are just so irritating to see though. It's not like they even light up the whole sign, just a little dot of it. They shine in the trees too haha
 

Forum statistics

Threads
132,182
Posts
1,863,611
Members
96,694
Latest member
CoopDogg

Latest posts

Top