Hids

[RollTide2]

I plan on ordering some HIDs after I get my pay check and tint my windows. I just wanted to know if this is right... Wattage: 35w? (don't know the difference)
Bulb: h11 (just lows for now). Bulb color: 6000k. Do I need the harness, error code eliminator, adaptor cables, or mounting brackets? I'm ordering from ddm tuning.

 

[09tahoehybrid]

I plan on ordering some HIDs after I get my pay check and tint my windows. I just wanted to know if this is right... Wattage: 35w? (don't know the difference)
Bulb: h11 (just lows for now). Bulb color: 6000k. Do I need the harness, error code eliminator, adaptor cables, or mounting brackets? I'm ordering from ddm tuning.

Ya 35w is what you need. No harness or anything else needed. My DDM 35w 5000k kit has been going strong for 6 months.

 

[RollTide2]

Alright thank you very much. Can't wait to order these. Can you still see well? My dad said I still have to be able to see when I get them haha.

---------- Post added at 08:19 PM ---------- Previous post was at 08:07 PM ----------

And do you think 8000k is too much?

 

[chauncey0337]

If you get any flickering or misfires, I'd recommend a relay harness. I think 8000k is too much and 5000k is just right for max output, just my opinion. But the higher in kelvin(k) you go, the bluer you get and lose usable light output.

 

[RollTide2]

By misfires, do you mean like the door switches unlocking when they are already unlocked, and I didn't hit any buttons?

 

[chauncey0337]

By misfires, do you mean like the door switches unlocking when they are already unlocked, and I didn't hit any buttons?

Sorry, no. By misfire, I mean one light coming on and the other not firing on. A relay will provide the ballasts with direct battery voltage when switched on. But you can always get a relay later if you need it.

 

[RollTide2]

Oh ok. I guess I won't need that part. Thanks for your help guys.

 

[zach2011]

I have read before that not using a relay harness could eventually lead to the damaging of electrical components in your vehicle. Read this:

http://v-ledsblog.com/2010/10/19/why-should-i-use-a-relay-harness-with-my-hid-kit/

 

[RollTide2]

Good to know. Thanks zach.

---------- Post added at 10:58 PM ---------- Previous post was at 10:50 PM ----------

What should I order for fogs? I think I'm just going to do it all at once.