Hoe pulls to the right when braking.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Green monster

Full Access Member
Joined
Mar 13, 2010
Posts
160
Reaction score
0
Location
Toronto, Canada
Well driving to work tonight and had to slam the brakes due to an idiot in a Honda cut me off, the Hoe pulled really hard to the right when on the brakes. I didn't think much of it at that moment but now every time i brake the truck is pulling to the right. In the summer I replaced all the brakes( rotors, pads, rear shoes and calipers). Has this happened to anybody else? I'm thinking the sliders might be sticking but would love some input.
 

zomeizter

Full Access Member
Joined
Nov 3, 2013
Posts
137
Reaction score
1
Location
North AL
Been there, seized sliders, on another occasion, I had to slam on brakes too and one of my calipers failed, cylinder got cocked in the caliper.
 

Donnie Yukonie

Yates Caretaker
Supporting Member
Joined
Jul 31, 2011
Posts
5,125
Reaction score
161
Could be the Sliders , However when this happened to me I found it to be a stuck caliper . how does your brake fluid look?
 

Asfalto

Member
Joined
Jun 13, 2012
Posts
44
Reaction score
0
Location
Northern Italy
maybe just silliness.. when it heppened to me it was just the front rh tire a little underinflated.
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
assuming tires are inflated correctly, either your left brake lines are clogged or either the left front or rear brake assembly is jammed in the released position.
 

GotExhaust.com

Supporting Vendor
Joined
Oct 25, 2013
Posts
222
Reaction score
37
Probably brake related but a good time to check your wheel bearings and ball joints for play.
 
OP
OP
Green monster

Green monster

Full Access Member
Joined
Mar 13, 2010
Posts
160
Reaction score
0
Location
Toronto, Canada
Well finally got to work on the Hoe today and the sliders were seized on the driver side caliper. Pulled them out, cleaned them up and lubed. The Hoe is back to normal :) Thanks guys
I know this is off topic but gotta replace the cats on the Hoe so thinking of doing a full exhaust. 2.5" manifold back into a single muffler and 3" tailpipe. Has anybody run a Flo-Pro Max muffler?
 

Forum statistics

Threads
132,325
Posts
1,866,007
Members
96,923
Latest member
quicks hos
Top