wjburken
Supporting Member
They should put “Hold My Beer and Watch This!” On the side of their truck.
Hot Garbage
- Thread starter Wizard Smokey
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Perfect train of thought here. Subbed.
tom3
Full Access Member
- Joined
- Jul 15, 2019
- Posts
- 1,066
- Reaction score
- 1,672
I can't get over the before and after pictures. Pretty dramatic change there!
OP
OP
Wizard Smokey
TYF Newbie
- Joined
- Oct 14, 2022
- Posts
- 19
- Reaction score
- 73
It's a christmas miracle!
Okay, maybe it's not that big of a deal, but I'm excited. Found a guy locally that had an LQ4 long block taking up space in his shop. He even delivered, for the low low cost of lunch. (Thanks Pete, you're a hero.)
First, we're gonna get the new unit all cleaned up and probably paint the block, just for laughs. Pull the pistons and get the ring gap set more properly for nitrous, so we can hopefully avoid nuking this one, too. Then we have to finish getting the old motor yanked out, and transfer over what bits need to come with. Then we can just stab the new one in. We're gonna stick with the stock ECU for now and tune it for the nitrous. We're also going to shop around and see what aftermarket radiator options there are, and we're definitely going to get an electric fan.
Hopefully we can have this engine ready to go back in within the next two weeks or so, depending on parts shipping and etc.
Okay, maybe it's not that big of a deal, but I'm excited. Found a guy locally that had an LQ4 long block taking up space in his shop. He even delivered, for the low low cost of lunch. (Thanks Pete, you're a hero.)
First, we're gonna get the new unit all cleaned up and probably paint the block, just for laughs. Pull the pistons and get the ring gap set more properly for nitrous, so we can hopefully avoid nuking this one, too. Then we have to finish getting the old motor yanked out, and transfer over what bits need to come with. Then we can just stab the new one in. We're gonna stick with the stock ECU for now and tune it for the nitrous. We're also going to shop around and see what aftermarket radiator options there are, and we're definitely going to get an electric fan.
Hopefully we can have this engine ready to go back in within the next two weeks or so, depending on parts shipping and etc.
OP
OP
Wizard Smokey
TYF Newbie
- Joined
- Oct 14, 2022
- Posts
- 19
- Reaction score
- 73
Realized i had forgotten all about this thread/forum lol.
Long story short, blew up two transmissions on the dyno (though we think the second might have been bad before i got it). Truck still hasn't done any big proper burnouts, but put down about 350hp at the wheels. Waiting on a TH400 now. Decided to ditch the nitrous for now, might put it back on in the future.
Repainted the truck! (Priorities).
Same shit as last time, house exterior paint from Lowe's and a cheap electric spray gun.
Long story short, blew up two transmissions on the dyno (though we think the second might have been bad before i got it). Truck still hasn't done any big proper burnouts, but put down about 350hp at the wheels. Waiting on a TH400 now. Decided to ditch the nitrous for now, might put it back on in the future.
Repainted the truck! (Priorities).
Same shit as last time, house exterior paint from Lowe's and a cheap electric spray gun.
OP
OP
Wizard Smokey
TYF Newbie
- Joined
- Oct 14, 2022
- Posts
- 19
- Reaction score
- 73
iamdub
Full Access Member
What’s that line or whatever it is attached to the back of the rig?
George B
¯\_(ツ)_/¯
Shredded tire.
Similar threads
