How Big Uh' Lift?!

[blackcoffee]

Ok so I was looking at a T-Bagg's Yukon tonight, A fellow member. He has his truck lifted but in different pictures the angles are very different and I can't tell how much lift it is.

In the top picture it looks like a 3-4" lift and it looks a lot better.


In the bottom picture it looks like a 6" lift and it looks to tall.

 

[fyremanpat]

top is 3" BL and bottom looks like an additional 4-6"

 

[blizz]

not to be a dick or anything...but why not ask him?

 

[bowtiefreak]

top is 3" BL and bottom looks like an additional 4-6"

I agree with this, two different set ups.

 

[blackcoffee]

Well then, I think I've decided when I do my lift I'll be doing a 4 inch lift with some fat ass tires. I don't want to be 6" higher. I like to be able to make significant turns without feeling like I'm gonna roll 30 times over ha. So for the time being until I can afford such lift I'm gonna crank torsion bars and drop a block in the rear I'm thinking 2 inches. Just to see how I like that height you know? I mean its a pretty big investment and I'd hate to get the 4 inch and think I wanted more but I'd hate to get the 6 inch and not be able to go back you know? This IS my daily driver and it's Not an exstension of my *****. I'm 5'9 and I don't want to be jumping to get into my own truck. I don't wanna look like the dumb ass lil' redneck that climbs his tires to get in his monster truck ha.

 

[99COOP]

go for a little crank and blocks, it'll look good.

 

[crmzendrgone]

I want to know how everyone gets more than a half and inche lift out of the TB I can only seem to get about max 3/4" lift???? and where is a good place to find blocks for the rear?

 

[99COOP]

You should be able to get more than that. Are your keys already cranked? You can answer that by seeing how close your upper control arms are to the bump stops.

 

[riviera rider]

lol i am 5 11 and have to do a little hop to get into my tahoe

 

[bowtiefreak]

sounds like the bars are shot is your are cranked all the way and only got a half inch