How Low is Impractical?

[OneTwo]

I don't have access to machine shop and I wanna go lower then 2 inches I think.

Sent from my SM-N910V using Tapatalk

You can use McGaughy's coil relocators if you don't have the resources available to do Tony's strut mod. You will pay significantly more than Tony's method, but it's worth it if you want to go lower.

I just ended up paying the $160-ish for the McGaughy's relocators because I made a last-minute decision that the 2" spindle wasn't going to be low enough. Install is fairly simple, as long as you have a decent spring compressor. You can go 1", 1.5", or 2" drop on the relocators, but I believe Tony said anything above 1.5" is going to wear your strut prematurely.

I went with the 1" drop on the relocators, but I'm wishing I would've done 1.5" for a little extra rake. I lowered the rear 4" using the Belltech kit Tony sells.

 

[NORCAL SS]

3/5 I had no issues

 

[NORCAL SS]

Another option. Get ride of autoride

 

[cambelsoop1]

3/5 I had no issues

I want this kit. Can I do it with autoride? It works y get rid of it. Pm me let's talk about who I give my cc # to lol..

You can use McGaughy's coil relocators if you don't have the resources available to do Tony's strut mod. You will pay significantly more than Tony's method, but it's worth it if you want to go lower.

I just ended up paying the $160-ish for the McGaughy's relocators because I made a last-minute decision that the 2" spindle wasn't going to be low enough. Install is fairly simple, as long as you have a decent spring compressor. You can go 1", 1.5", or 2" drop on the relocators, but I believe Tony said anything above 1.5" is going to wear your strut prematurely.

I went with the 1" drop on the relocators, but I'm wishing I would've done 1.5" for a little extra rake. I lowered the rear 4" using the Belltech kit Tony sells.

Sent from my SM-G935V using Tapatalk

 

[cambelsoop1]

No idea you that happened .. this new app is confusing lol

Sent from my SM-G935V using Tapatalk

 

[OneTwo]

I want this kit. Can I do it with autoride? It works y get rid of it. Pm me let's talk about who I give my cc # to lol..

Tony (NORCAL SS) is the guy. He'll match prices and knows literally everything about lowering these SUVs, so he can get you set up with whatever you need.

I did a 3/4 drop with my Autoride and so far, so good.

 

[cambelsoop1]

Tony (NORCAL SS) is the guy. He'll match prices and knows literally everything about lowering these SUVs, so he can get you set up with whatever you need.

I did a 3/4 drop with my Autoride and so far, so good.

What size wheels.. pics?


Sent from my SM-G935V using Tapatalk

 

[OneTwo]

What size wheels.. pics?


Sent from my SM-G935V using Tapatalk

22s for now, going to run 24s eventually.

Pics are here on page 4:

http://www.tahoeyukonforum.com/threads/matts-denali-build.79619/page-4

 

[cambelsoop1]

Very nice.. yea I'm ready to talk to norcal

Sent from my SM-G935V using Tapatalk

 

[NORCAL SS]

I have 3/5 on my escalade