How to REbadge nameplates?

[BEEMDUB]

Got "tahoe" nameplates in the mail today (thank you nrcpharmd). How should I go about puttin them on my tahoe? Whats the best process with product and all? I don't want them fallin off goin down the road and me lookin like a ******* lol

 

[07Burb]

Go to your auto parts store and get 3M adhesive tape. Be sure and get the red stuff as it's very strong and will not fall off. You will have to cut it to size but will work well. With making sure it's placed correctly on your Hoe you'll need to find a Hoe that still has it's badges and take measurements

 

[BEEMDUB]

Go to your auto parts store and get 3M adhesive tape. Be sure and get the red stuff as it's very strong and will not fall off. You will have to cut it to size but will work well. With making sure it's placed correctly on your Hoe you'll need to find a Hoe that still has it's badges and take measurements

This stuff right here? What do you think the easiest way to cut it too size is?

 

[07Burb]

Yes that and just use a sharp razor blade.

 

[BEEMDUB]

Yes that and just use a sharp razor blade.

cool, thank you sirrr, something tells me the hardest part for me will be lining it all up..I'm terrible at not making things crooked lol

 

[07Burb]

I know the feeling

 

[Goodinblack]

Lowes has the 3m tape too.

Wicked strong stuff.

 

[Vegasf6]

There is a gray foam 3m body panel tape, then there is also a yellowish clear 3m VHB tape. I really like the clear if you can find it. It seems to have better performance for outdoors, the gray hardens after awhile.

Here is the clear.
http://compare.ebay.com/like/261074196057?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar

 

[STORMIN08]

i usually use a long piece of tape , put the top edge at the height you want your badges. place a piece on the badge, and mark the tape for the spacing.

 

[BEEMDUB]

BOOM

I don't know why the "T" looks so much lower than the rest in that second pic but its not!