20Tahoe12LT
Full Access Member
I guess I should Introduce myself.
- Thread starter DroppedAsAChild
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Chevrolado
Full Access Member
Welcome welcome! 
Nice looking vehicles.
Nice looking vehicles.
OP
OP
DroppedAsAChild
TYF Newbie
- Joined
- Apr 6, 2012
- Posts
- 17
- Reaction score
- 3
UPDATE:
Freshly Lowered!!!!!
A Few Pics and Specs More Pics to come later.
3.5ish" front 2" DJM Spindles and 1 whole Coil Cut off 2500 heavy duty 454 big block coils and 4" back, 2" Beltech Shackles and 2" Hangers with Beltech Street Performance shocks on Good Year Eagle RS-A Police 235/55/17's all around for now, until I can order larger rears, they are on 17x7 & 17x8 Ridler wheels. The Wheels and Tires were FREE so no complaints. I and sitting at 27.5" front fender measurements and 28.5" rear. The Air dam from the center sits 5" front the ground. I borrowed the Headlights and parking lights off the Sierra as its parked for this year. I will order new stuff for the Sierra next year. The corners I had laying around. The emblem is rattle canned hammer finish grey. While the drop was getting done new upper and lower moog Bj's, New idler arm, pitman arm, Inner and outer tie rods were changed. I have added a full Stereo, the box is unfinished, but I will add pics of that later, but I have Full components and 3 JL 10W0's powered by a Jx1000 in a custom box located on the driver side.
Freshly Lowered!!!!!
A Few Pics and Specs More Pics to come later.
3.5ish" front 2" DJM Spindles and 1 whole Coil Cut off 2500 heavy duty 454 big block coils and 4" back, 2" Beltech Shackles and 2" Hangers with Beltech Street Performance shocks on Good Year Eagle RS-A Police 235/55/17's all around for now, until I can order larger rears, they are on 17x7 & 17x8 Ridler wheels. The Wheels and Tires were FREE so no complaints. I and sitting at 27.5" front fender measurements and 28.5" rear. The Air dam from the center sits 5" front the ground. I borrowed the Headlights and parking lights off the Sierra as its parked for this year. I will order new stuff for the Sierra next year. The corners I had laying around. The emblem is rattle canned hammer finish grey. While the drop was getting done new upper and lower moog Bj's, New idler arm, pitman arm, Inner and outer tie rods were changed. I have added a full Stereo, the box is unfinished, but I will add pics of that later, but I have Full components and 3 JL 10W0's powered by a Jx1000 in a custom box located on the driver side.
- Joined
- Jan 3, 2011
- Posts
- 50,348
- Reaction score
- 17,135
Look forward to seeing pics of the stereo setup!
Similar threads
