MIchael Bernich
TYF Newbie
- Joined
- May 17, 2021
- Posts
- 1
- Reaction score
- 15
Hello everyone, 1st post here. Have been creeping on the website for a couple weeks now.
Installed
Part Number
84741563
Emblem Pkg / Black
$321.43
From gmpartsdirect.com this past weekend. Was worried I would need to remove the entire front clip to install, however found a workaround.
Removed hood latch release extension, plastic top cover, and then the 10mm bolts holding the top of the grill to the core support. Was bale to reach hand between core and grill and remove the old GMC logo. New logo snapped in place flawlessly.
As far as getting to the back of the drivers side headlight. There are 2 ways to do this. One, remove front fascia assembly and headlight. This seemed like an accident waiting to happen.
I chose option 2.
Turn steering wheel locked in right hand turn and remove the 5 torx head screws holding the inner fender liner in the front of the wheelwell. Once removed you have access to headlight plug. Remove plug and add pigtail plug in. Feed wire under core, in front of the blinds clipping on core rail and plug into emblem.
At most, a 45 min to hour job. Took me longer to find the right tools (torx) than it did to unplug and route the wire.
Installed
Part Number
84741563
Emblem Pkg / Black
$321.43
From gmpartsdirect.com this past weekend. Was worried I would need to remove the entire front clip to install, however found a workaround.
Removed hood latch release extension, plastic top cover, and then the 10mm bolts holding the top of the grill to the core support. Was bale to reach hand between core and grill and remove the old GMC logo. New logo snapped in place flawlessly.
As far as getting to the back of the drivers side headlight. There are 2 ways to do this. One, remove front fascia assembly and headlight. This seemed like an accident waiting to happen.
I chose option 2.
Turn steering wheel locked in right hand turn and remove the 5 torx head screws holding the inner fender liner in the front of the wheelwell. Once removed you have access to headlight plug. Remove plug and add pigtail plug in. Feed wire under core, in front of the blinds clipping on core rail and plug into emblem.
At most, a 45 min to hour job. Took me longer to find the right tools (torx) than it did to unplug and route the wire.
