Installed these today

[Da90]

Got mine in the mail today.

The 2017 Suburban was a direct swap. No issues as stated above. They are somewhat washed out by the running board LEDs but still very noticeable.


The Sierra lights fit but the hit the mirror frame on the inside. That in return makes the light sit sideways in the mirror and projects a crooked logo. They do not fit flush in the mirror either.




I ended up drilling the mirror frame through the hole. It’s damn sure not the prettiest thing I’ve modified but it worked. I did have to spin the light in the housing to the appropriate angle. Be careful you don’t hit the mirror motor behind the frame like I did.


Done!





Sent from my iPhone using Tapatalk Pro

 

[Doubeleive]

Got mine in the mail today.

The 2017 Suburban was a direct swap. No issues as stated above. They are somewhat washed out by the running board LEDs but still very noticeable.


The Sierra lights fit but the hit the mirror frame on the inside. That in return makes the light sit sideways in the mirror and projects a crooked logo. They do not fit flush in the mirror either.




I ended up drilling the mirror frame through the hole. It’s damn sure not the prettiest thing I’ve modified but it worked. I did have to spin the light in the housing to the appropriate angle. Be careful you don’t hit the mirror motor behind the frame like I did.


Done!


nice, mine were out for delivery today but got rescheduled for tomorrow, so I guess I will need the dremel since I am sure the sierra and silverado are identical inside.


Sent from my iPhone using Tapatalk Pro

 

[Da90]

Yeah a Dremel would work better. I have one and didn’t think about it. When you install the lights they will leave a scuff on the frame showing where you need to cut.


Sent from my iPhone using Tapatalk Pro

 

[Doubeleive]

Yeah a Dremel would work better. I have one and didn’t think about it. When you install the lights they will leave a scuff on the frame showing where you need to cut.


Sent from my iPhone using Tapatalk Pro

mine showed up yesterday but I was out of town and didn't get back till late so today I took the dremel and shaved a little off of the side of the light and they fit right in the Silverado, then I trimmed the clip hole a hair so I can turn them straight, too bright outside right now to see anything will follow up later this evening

left side wires go the same as oem, right side you have to reverse the wires (polarity)

 

[Da90]

mine showed up yesterday but I was out of town and didn't get back till late so today I took the dremel and shaved a little off of the side of the light and they fit right in the Silverado, then I trimmed the clip hole a hair so I can turn them straight, too bright outside right now to see anything will follow up later this evening

left side wires go the same as oem, right side you have to reverse the wires (polarity)

View attachment 255019

I started filing down the light itself and got impatient and started drilling. Lol

I do remember having to reverse the polarity on the right side now that you mention it.


Sent from my iPhone using Tapatalk Pro

 

[Doubeleive]

I started filing down the light itself and got impatient and started drilling. Lol

I do remember having to reverse the polarity on the right side now that you mention it.


Sent from my iPhone using Tapatalk Pro

I didn't do anything else to try and correct the angle last night it's been 115 deg here for a few days straight the heat just wears you out. one side is kind of straight the other needs a little more adjustment

 

[Timers]

thanks everyone. minus $100 for me now.

 

[Beagleman]

I just ordered a set of the Bow Tie lights, for my 19 Tahoe, hope they fit and work.....

 

[Beagleman]

AND, I am happy to say I got them, installed and they work PERFECTLY in my '19 Tahoe Premiere ........... a little more pricey in Canada, BUT the U.S. Part number is the same in Canada as the USA, which was really surprising, as that is a VERY rare occurrence, they retail in Canada for $169.47 CAD, I got mine a little cheaper, as the parts guy at the dealership is good to me..... so thanks guys , this is the kind of cool stuff I was looking for, now to find a reasonably priced set of RED Caliper covers for my girl.................
Jeff

 

[Rocket Man]

AND, I am happy to say I got them, installed and they work PERFECTLY in my '19 Tahoe Premiere ........... a little more pricey in Canada, BUT the U.S. Part number is the same in Canada as the USA, which was really surprising, as that is a VERY rare occurrence, they retail in Canada for $169.47 CAD, I got mine a little cheaper, as the parts guy at the dealership is good to me..... so thanks guys , this is the kind of cool stuff I was looking for, now to find a reasonably priced set of RED Caliper covers for my girl.................
Jeff

Please don’t put caliper covers on, they’re cheesy plus they hold heat. Paint your calipers if you want them red.