Intro and Barn Door question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DavidT

TYF Newbie
Joined
Oct 2, 2016
Posts
3
Reaction score
0
Greetings. New member here, been lurking a while. Lots of great info on this site! I inherited a 2001 Tahoe LT with the barn doors when my dad passed last year. I have worked out most of the little things that just didn't work, all but this last one. The barn door power lock actuator is bad. I CANNOT find one on the internet anywhere! Anyone have a clue what part number to use? I can't find one on the online chevy parts dealers or aftermarket. They only show the front and rear passenger doors, and the liftgate. It's like the double door option doesn't even exist! IF someone has the OEM number I can cross, or a BWD or Dorman number, that will be greatly appreciated!
Thanks in advance,
DT
 
OP
OP
D

DavidT

TYF Newbie
Joined
Oct 2, 2016
Posts
3
Reaction score
0
On one flat face is Invotronics mfg. and made in Canada. On one side is stamped 10391. Tried lots of combinations of that info but still no joy.
Thanks for the reply, Tony
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
31,718
Reaction score
47,465
Location
Central Jersey
On one flat face is Invotronics mfg. and made in Canada. On one side is stamped 10391. Tried lots of combinations of that info but still no joy.
Thanks for the reply, Tony
That's what we're here for , try to help each other .:beer:
 
OP
OP
D

DavidT

TYF Newbie
Joined
Oct 2, 2016
Posts
3
Reaction score
0
I'm really trying to catch up on a lot on this truck. Once I drove it a little, I found all the things my dad just lived with. Already replaced the blend door motor on the front AC, rear brake pads and e-brake shoes, and the brake line running from the ABS block to the rear. Cruise didn't work, and the previous owner had installed LED tail lights without a resistor, so I fixed that. The rear door speakers were shot, so I replaced them, and found the wiring bad to them, so they got re-wired. Still have to do the tow/haul switch and this pesky door lock motor. All the while, I am redoing his 2001 F250 Super Duty; Rusted cab corners, loose dash, paint re-fresh, and mostly a good cleaning! It was his contractor work truck for years, but he hardly left town with it. It only has 82K original miles, so I can't let it go. Too much life left in that one.
I'm looking forward to learning more here, and hope I can help out some, too.
 

Forum statistics

Threads
132,780
Posts
1,874,189
Members
97,616
Latest member
tygbenn
Top