is this bad oil pressure idle
- Thread starter harry604
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It sure would help to know the vehicle and engine info and convert the kPa to pounds. C'mon man!
Welcome to the forum, from Oregon.
Welcome to the forum, from Oregon.
donjetman
Full Access Member
- Joined
- Oct 22, 2018
- Posts
- 1,757
- Reaction score
- 3,111
It's okay
strutaeng
Full Access Member
Nothing really jumps out at me on that cluster, except you need to add windshield washer fluid...
Joseph Garcia
Supporting Member
- Joined
- Aug 2, 2018
- Posts
- 8,133
- Reaction score
- 11,287
Welcome to the Forum from NH.
Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.
I hope that you will become a participating member in the Forum's discussions.
Pics of the truck, please.
You are already receiving sage advice from the knowledgeable folks on this Forum.
That is a normal oil pressure for hot oil.
Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.
I hope that you will become a participating member in the Forum's discussions.
Pics of the truck, please.
You are already receiving sage advice from the knowledgeable folks on this Forum.
That is a normal oil pressure for hot oil.
Marky Dissod
Full Access Member
If your engine has V4 mode hardware (likely), parts of that subsystem may bleed off some oil pressure.
Disabling / shutting off V4 mode will not fix the underlying hardware issue.
Even given that, your oil pressure is on the low side of OK.
If you've any doubts, have your oil pressure checked, preferably by a mechanic
with a DIFFERENT SEPARATE physical gauge in a different spot.
Disabling / shutting off V4 mode will not fix the underlying hardware issue.
Even given that, your oil pressure is on the low side of OK.
If you've any doubts, have your oil pressure checked, preferably by a mechanic
with a DIFFERENT SEPARATE physical gauge in a different spot.
