Jounce bumpers after torsion keys

[Five]

I have read that after installing aftermarket keys and leveling that the jounce bumpers need modification to contact the lower control arms. Can anyone post pics of the mods they made or e explain the process?

 

[01Konvict]

Yes it is preferred to keep the jounce stops on the lower arms. One guy on here did use so me 1/2"X1" box tubing and bolted the jounce stop through the tubing into stock hole. This offset the stop to touch the lower arm while keys were indexed.

 

[scoobyxj]

I drilled a hole in the lower control arm where the jounce contacts the arm, and stacked stainless fender washers as close to the size of the jounce as I could find, and a stainless carrige bolt to secure them. It was actually really easy to drill through the arm. I think it took me like 30 min to do both sides.

 

[Austinite]

I was thinking about bolting one of these to the LCAs http://www.amazon.com/Rubicon-Expre..._UL160_SR160,160_&refRID=003ZX3GQ48NE5C8KN395

Anyone tried anything like that?

 

[Five]

I was thinking about bolting one of these to the LCAs http://www.amazon.com/Rubicon-Express-RE1380-Front-Lower/dp/B006GJO302/ref=pd_sim_263_1?ie=UTF8&dpID=519NEyLugWL&dpSrc=sims&preST=_AC_UL160_SR160,160_&refRID=003ZX3GQ48NE5C8KN395

Anyone tried anything like that?

Looks interesting, I was thinking of a plastic or metal piece kind of like a coil spacer attatched to the control arms. I'll have to see what kind of space I'm working with.

 

[Austinite]

Welp, I ordered the 2" bump stops from Amazon. Ended up cutting 1/2" off and installed em on the LCAs. Worked perfectly and rides like a dream now.

 

[Five]

Welp, I ordered the 2" bump stops from Amazon. Ended up cutting 1/2" off and installed em on the LCAs. Worked perfectly and rides like a dream now.

Can you send me a link to the stops?

 

[Five]

Never mind, I'm an idiot...

 

[Austinite]

Never mind, I'm an idiot...

If you can find those in 1.5", it would save from cutting the 1/2" off, but I couldn't find em. Either way, still worked.

 

[Five]

I'm actually looking at these and adding fender washers to increase the height to fit my needs. I'm a little concerned about the mounting hole on yours damaging the jounce stops over time.

http://www.amazon.com/dp/B0018LMSBO...TF8&colid=2KFE9ZTHDDWTL&coliid=I30VEC6SRLYYHA