Laying Low

[nysmedic]

Hey, Sumo, looks good.

Was wondering what part # the Belltech you ordered was.

 

[NORCAL SS]

He got it from me. Pm me for info

 

[nysmedic]

Thanks

 

[Mpeep]

Installed my Beltech 2/3 kit toady. Loving it. the rear is easy to do, straight forward. Front can be a little tricky. I have 4x4 so i had to do some trimming of the upper and lower Ball Joints in oder to clear the Shaft and clear the 17 rim i current have on. Other than that, Wasnt bad. Did the alignment and Im Good to go. I recommend that when doing the 2/3or4 drop, use the 1' spacer that it comes with. Had i left it out, i think the rear would sagg too much. right now Front and Rear are both about 34 inches Ground to fender lip

Front Measured about 36 inched before drop

Rear measured about 38inces before Drop

stock spindles and coils compared to Beltech

Front after Drop

Rear after Drop

I have a 2007 tahoe ppv I want to do the same drop on my truck...what size tire you have on your taho? It looks perfect

 

[sumo]

I have a 2007 tahoe ppv I want to do the same drop on my truck...what size tire you have on your taho? It looks perfect

265/70/17

 

[Mpeep]

265/70/17

265/70/17

 

[Mpeep]

Thanx ...by the way do u still have ur push bumper if so do u want sell it?