Tim Quigley
Full Access Member
I'm in the process of putting LED bulbs in the taillight of my 2012. I'm seeing if anyone just did the LED Flasher Relay Decoder or do I have to put in the actual resistors. I don't wanna cut any wires.
LED BULBS in Taillights
- Thread starter Tim Quigley
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
Tim Quigley
Full Access Member
OP
OP
Tim Quigley
Full Access Member
Bump
tlsnokuyeulb
Member
- Joined
- Jan 6, 2013
- Posts
- 81
- Reaction score
- 1
I put resistors in mine. Make sure you get good LED's though. If you get the cheap ones and put them in all around, it will create some headache. I got cheap ones from a local vendor and even with resistors, the turn signals would light all the lights up and never fixed the hyper flash. Then I got the Sylvania Zevo from AutoZone with resistors and everything is like normal.
OP
OP
Tim Quigley
Full Access Member
Will these be good instead of cutting into my factory harness?
