LED swap

[weifert]

I have a 2011 Tahoe.
Does anyone know of a thread that shows how to carefully remove the plastic covers so a LED swap can be done?

Thx.

 

[Mike_L]

You can see the notches on all the lenses. Stick in a small screwdriver and pry them off.

 

[NathanJax]

I have a 2011 Tahoe.
Does anyone know of a thread that shows how to carefully remove the plastic covers so a LED swap can be done?

Thx.

What plastic covers? Interior, Exterior? This is posted in the general section and your question is not real specific...

 

[Gzes]

Yea are they for the doors? Map lights? Mirror lights? Cluster? We need more info

 

[stevek]

All of them have little notches on where to take them off. Like said above, use a tiny screwdriver and pry them off. If you want to see pics of a conversion, see my album.

 

[2010_5thgen]

if its for the interior us a small fla thead and just pry the cover off gently. it will come off. not too hard. also works the same way for the mirror lights.

 

[Goodinblack]

Warmer temperatures help........ less prone to cracking.

 

[12rtstp953]

I installed led in my drl and interior of my 11 Tahoe.... Easy besides pulling front bumper to remove headlight..

 

[2011yukon]

Where did y'all purchase your LEDs at? I have been considering doing this mod just not sure of a good place to buy them.

 

[Mike_L]

I got all mine on eBay. $12.99 for 4 bulbs, so I bought 8.

These are the interior ones: http://www.ebay.com/itm/350666340213?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

I don't buy stuff because of the name on it. Thats why I bought a Denali instead of an Escalade. If it does the job just as well, and costs less, its my choice.