Lets talk Subwoofers...help again

[Black_Rain]

RIDE TILL I DIE..AND I LOVE ITTT!!!

What is SRH mean?

You aint know?!?


Supporting Radical Habits is one, there are some other variations.
http://www.srh.com/category/news/

 

[tast101]

I have JL's shit rattles the hood.

http://www.youtube.com/watch?v=va4x3LM_x2Q

---------- Post added at 11:52 PM ---------- Previous post was at 11:51 PM ----------

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/va4x3LM_x2Q&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/va4x3LM_x2Q&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

here's a how to for embedding videos.

http://www.tahoeyukonforum.com/forum/showthread.php?t=149


[yt]va4x3LM_x2Q[/yt]

 

[J-Will]

RIDE TILL I DIE..AND I LOVE ITTT!!!

What is SRH mean?

support radical habits. like he said theres a couple variations. but thats the original. lol u listen to kmk and dont know what srh is..

 

[foreverfalcon40]

FF40 you have lots of lights on lol.

I wanna put a JLW7 12" in my truck, I have a rockford sub in there now. Sounds pretty good, but its gunna blow soon since im pumping 1000 Watts to it right now.

I like apline type R thats what you should get if your on a budget.

Lights...I know..,

CEL: Leaky Valves in My head (part of the reason why my truck been MIA for almost a month (the end of the week will be one month). After I installed my new worked head It will rid of the misfire and BYE BYE CEL

ABS Brake light: Its three codes. When I first got my truck I diagnosed it as faulty turn signal switch. I found the OEM one and it was melted. SO I replaced it and ALL MY LIGHTS WORK THIS TIME! Few days later...light goes on for the turnsignal switch BUT ALL MY LIGHTS WORK...WTF?

Security Light: I have no idea. I have two alarms in there. OEM and Aftermakret. I hate them both. Next project is to rip BOTH OUT and install the new viper!

I do maintain my shit..not one of those peeps that will spend money on anything and evrything for my VECHILE BUT NOT MAINTAIN it. I do all my own work and haven't been able to address the CEL b.c. of school! Since school is out I decided to tackle the head job which has been a over my head. But shit will be done..and she will be able to breathe better b/w the heads and my MSD Ignition, cowl hood, and BB tune

 

[OKLAGMCRUISER]

my vote is for Treo TSX...i have 3 10's, but no time to rip my yd apart and sound deaden and install everything.

 

[blueflamed03]

i got SRH tatted on me. ride till i die

i honestly prefer kicker subs. my l7s are the best subs ive had. just my opinion tho.

I like how you think

 

[350VortecSSCT]

Well Overall, my budget is 1500, I was looking into Kicker, Alpine Type R or Type X ( the 450$ sub) and JLw7...IF I do JL I am going all out

Two Door Tahoe, removing spare time, thereis a lot of room I can fit a bed back there and I have...When a Hoe is Rockin, There is a Hoe in the Hoe.

Now the Hoe is really going to rock...I got two JL 6x9s and an Apline CDA-106D Flipout...Need Subs.

 

[hapyspaz]

I may get smacked here, but Im a tried and true Polk Audio guy. Had 4 10's in my old reg cab 82 C10 and it would bow the windshield with 300 watts per 10"

I have had the 4 10's for 10 years now and have only been able to blow one of them.

Really comes down to space and power. For example, I had a small space and wanted 4 10's. Polks require very little air space and have a massive power range. Started off with a 300 watt amp running them. Then upgraded to a bridged 600 watt amp. Now I have 2 600 watters and a 400 for the rest of the system. Too bad its all sitting in a cabinet in the garage...

 

[DJTricky]

i would say go with some 10's, they to me sound the best, nice and clear bass. but sometimes wont hit the low low's, i do my "burps" at 45 htz



i can do 150's on just the 4, that video was back when the other 2 amps(white ones) would not turn on until i switched to HC(high current) mode, (needed to be plugged into a power source pushing 16V)

PS, the stuff moving is actually moving a lot more, the camera just could not pick it up


this vid is from my buddy(my hoe) before i got her painted gloss black and my rims and lower and alot of other stuff lol but it is my hoe.

http://www.youtube.com/watch?v=4BrL4YlXiIk

 

[blueflamed03]

10's can hit lows when done right.