Level with 285/70/17's

[Kuhndog-11]

I ordered a CCM 2.5/1" leveling kit for my 2014. Should be in this Friday and hopefully I'll get it on this weekend. I also ordered a set of toyo open country at3's in 285/70/17 and a set of vision manx 2 overland wheels in a 17x9 +18 offset. Should give me a little poke but not extreme. I may be wrong on that. We will see. I'll post once the level is on and then when the wheels and tires get here from custom offsets. I can post about the install of the level if anyone is interested. Just let me know. First little build thread. Wanted to give it a whirl.

 

[Bill 1960]

Looking forward to seeing how she looks. Sometimes I think I would prefer a mild lift and 33”s.

 

[Kuhndog-11]

My wife is actually for the lift. We will see how she feels about the wheels lol. These tires will be about a 32.7". Close to 33's. I don't see many tahoe's in my area with any modification so it will give it a unique look even with how mild this modification is.

 

[87chels]

285/70r17 fit ours with stock rims and stock suspension not sure how they will fit yours with that much offset hopefully the level is enough to make room for them to turn.

 

[Kuhndog-11]

Quick update. Got the ccm level in and I'm very impressed with the quality. the rear spacers are billet and look great. For the front, the spacers have very nice welds and come with the hardware needed for install. Hopefully I can get this installed over the weekend.

 

[Kuhndog-11]

285/70r17 fit ours with stock rims and stock suspension not sure how they will fit yours with that much offset hopefully the level is enough to make room for them to turn.

I may have to trim the inner liner a touch but from what I have read these should fit without too much fuss.

 

[Kuhndog-11]

Ok I got the ccm kit on yesterday. As for ease of install, it wasn't bad at all. The only thing that the instructions didn't have that I ended up needing was a coil spring compressor. not a big deal. Took me about 5 hours to do working at a easy pace and having to run to town to get the spring compressor. Really happy with the quality of this kit and that it gives you all the torque specs you need to get the job done right. I will have to check the torque on everything in 500 miles but other than that it is done. I am getting an alignment today and the wheels and tires should be here tomorrow. Don't mind the spare lol. If you are looking for a little more height I highly recommend this kit. For 160 bucks and a little bit of time this is a great option. I'll post again on the fitment of the wheels and tires when I get them and any trimming that was needed to avoid rubbing. Also ride quality doesn't seem to have changed. Maybe a slight bit rougher in a big dip in the road but overall not a whole lot different.

 

[Kuhndog-11]

Quick update. I got the wheels and tires but they sent me the wrong lug nuts. I got the spiked lugs instead of the splined ones. They were really easy to work with and got the right ones sent out immediately. I'll hopefully get those in the next couple days and throw the wheels on.

 

[09_4WD_YUKON]

Here's mine.... CCM leveling with Mickey Thompson MTZ 285/70/17

 

[Kuhndog-11]

Here's mine.... CCM leveling with Mickey Thompson MTZ 285/70/17View attachment 343576

How much trimming did you have to do?