"Leveling" kit installed with new tires

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

nmsyukon

Full Access Member
Joined
May 5, 2010
Posts
233
Reaction score
7
Found a deal on some cooper's that I couldn't pass up so I ordered them and my 2.5/1 leveling kit
7e27e92318d90cac37b01ab3156a565b.jpg


Then as I am waiting for them to arrive, a buddy of mine decides he does not like his bfg ko2 and wants to sell them for cheap.

So I went ahead and bought them to see how they would look. Pretty happy overall. Other than the front sitting about a half inch taller than the rear. Can't decide if I want to swap out the spacer or not though.

Tires are 275 70 18 and do a fair amount of rubbing on the liner and the corner of the wing. Some trimming should clear that up though.

b5061b77e0afd16111390066834bf1e6.jpg
4f06954521b553ade6a6f61e5f955da9.jpg
70f6e663de1fdf3cbc4476140c39184b.jpg


Sent from my SAMSUNG-SM-G900A using Tapatalk
 
Last edited:
OP
OP
N

nmsyukon

Full Access Member
Joined
May 5, 2010
Posts
233
Reaction score
7
Yeah I'm not liking the lean at all, especially when i do a little towing
 

BlkYukon

Full Access Member
Joined
Oct 8, 2015
Posts
107
Reaction score
14
Can you take pics of where it is rubbing? Those 70's are a good half inch taller than the 65's
 
OP
OP
N

nmsyukon

Full Access Member
Joined
May 5, 2010
Posts
233
Reaction score
7
I didnt think to take any before i did some trimming and molding with a heat gun. Basically i cut the brace behind the bottom trim piece just like zedz71 had outlined in his thread and then zip tied the liner back some to give more clearance.

In my bottom pic, you can see the head of a screw that is holding the liner to the bottom trim piece. This is on the drivers side. I rubbed exactly where that screw was and in about 3 inches on the liner. I also rubbed the bottom of that trim piece, so i had to trim it back at the bottom corner.

Also on the driver side, i did not want to trim the brace so much that it would not bolt back up at the corner of the bumper/liner/trim piece. Unfortunately, i rubbed the brace in that spot. So I used a heat gun to form it back a little bit. I'll have to get some pics when i can.
 
OP
OP
N

nmsyukon

Full Access Member
Joined
May 5, 2010
Posts
233
Reaction score
7
Drivers side. It really doesn't look this bad in person, but I do need to clean it up a bit. Noticed I cut some of the liner, the brace now forms an upside down "u", and I trimmed some of the trim piece at the bottom
406d26d7405df01eb81c4f3685907829.jpg
41ef6569031533588b2557b02e4f0996.jpg


Sent from my SAMSUNG-SM-G900A using Tapatalk
 
OP
OP
N

nmsyukon

Full Access Member
Joined
May 5, 2010
Posts
233
Reaction score
7
Thanks. I really the ko2's. Beefy look with nice quiet ride.

Loving the look of your tahoe. One of my favorite colors on the tahoe


Sent from my SAMSUNG-SM-G900A using Tapatalk
 

Fosscore

Full Access Member
Joined
Apr 16, 2014
Posts
10,547
Reaction score
18,369
Thx sir. The metallic blue is pretty cool.
 

Forum statistics

Threads
132,767
Posts
1,873,943
Members
97,605
Latest member
audley71
Top