lift/level kit
- Thread starter blknkt
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 608
you want to bring the front up?
domin8
Just Plinking
- Joined
- May 9, 2011
- Posts
- 6,038
- Reaction score
- 10
What about the rear?
I also have an 07. I went with the Reddy Lift 2.25/1.5 leveling kit. I like it very much. I was able to maintain a slight rake with this kit.
Sent from my myTouch_4G_Slide using Tapatalk
I also have an 07. I went with the Reddy Lift 2.25/1.5 leveling kit. I like it very much. I was able to maintain a slight rake with this kit.
Sent from my myTouch_4G_Slide using Tapatalk
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 608
Only thing I have is the belltech adjustable front struts which lift up to 2 inches.
I am trying to figure out the same thing. I just want to bring the nose up 1-1.5" max. Rear already sets plenty high for my needs.
Was looking at SST 66-3090 1-1.5 lift spacers
The 4x4 shop was showing me a zone kit that is much easier to install since it adds hight from the lower shock mounting point rather then the top of the strut tower like the SST spacers.
Cost is less then half the price of the SST kit installed. However it's stated lift is 2"s not the 1" that I am wanting.
Anyone have any thoughts or experience with these kits and Info on other options.
---------- Post added at 07:48 PM ---------- Previous post was at 07:25 PM ----------
I was searching around this site and found what I was looking for
Originally Posted by bigbluebowtie
He said he only wants to level, so why would he want to use a ccm front and REAR kit?
A bottom mount kit that is adjustable is what you are looking for.
I like this one on ebay Item number: 110795401789
The airlift bags will do a super job when you put a load on the back
Bingo!
I am looking to do the same thing and this looks like the perfect solution.
Thanks
Here is a link if anyone eles is looking.
http://www.ebay.com/itm/110795401789..._fvi=1&vxp=mtr
Was looking at SST 66-3090 1-1.5 lift spacers
The 4x4 shop was showing me a zone kit that is much easier to install since it adds hight from the lower shock mounting point rather then the top of the strut tower like the SST spacers.
Cost is less then half the price of the SST kit installed. However it's stated lift is 2"s not the 1" that I am wanting.
Anyone have any thoughts or experience with these kits and Info on other options.
---------- Post added at 07:48 PM ---------- Previous post was at 07:25 PM ----------
I was searching around this site and found what I was looking for
Originally Posted by bigbluebowtie
He said he only wants to level, so why would he want to use a ccm front and REAR kit?
A bottom mount kit that is adjustable is what you are looking for.
I like this one on ebay Item number: 110795401789
The airlift bags will do a super job when you put a load on the back
Bingo!
I am looking to do the same thing and this looks like the perfect solution.
Thanks
Here is a link if anyone eles is looking.
http://www.ebay.com/itm/110795401789..._fvi=1&vxp=mtr
Last edited:
Similar threads
