Lifted/Leveled 2021 - Postem Up

[FatDog]

View attachment 369563

2021 Tahoe LT 4WD
1" Motofab "Level"
285/60R20 Toyo AT3's on the stock wheel
No spacers, no rubbing, no trimming

I wanted to go with the 3" Readylift SST kit and a little bigger tire, but the wife needs to still be able to get into parking garages. We really like how it came out.

Any more pics???

 

[FatDog]

Hey, new member. 2022 Z71 on GM 22s with 33X12.50 toyo M/Ts with motofab 1” level.View attachment 376345

How about some additional pics??

 

[m711]

2021 Suburban Duramax. I added RC 2" level kit, 285/50/22 Toyo Open Country AT III.

 

[nick14226]

Just added 1.25” Bora spacers.

 

[elkdaddy70]

...
View attachment 277466

Looks great!

 

[elkdaddy70]

Need to do the leveling kit still - but here is my 23 on 24x10 Lexani’s and 305/35R24 Nitto Recon Grapplers

 

[nick14226]

Just went to do a little trimming to get the felt liner pulled back a bit more in the wheel well, anyone else run into this monstrosity or did they start it for the 22's? Could hook a chain to this thing and pull a tank out of a ditch. By BFH wasn't B enough. Took the cutoff wheel to the lower corner but sounds like I'm still rubbing in reverse at full lock so need to take more off.

 

[olyelr]

Just went to do a little trimming to get the felt liner pulled back a bit more in the wheel well, anyone else run into this monstrosity or did they start it for the 22's? Could hook a chain to this thing and pull a tank out of a ditch. By BFH wasn't B enough. Took the cutoff wheel to the lower corner but sounds like I'm still rubbing in reverse at full lock so need to take more off.

View attachment 384727

Looks like a cover to protect some ac lines and maybe some wiring? Does it just unbolt?

 

[nick14226]

Looks like a cover to protect some ac lines and maybe some wiring? Does it just unbolt?

(4) very large bolts that are visible, going to try to pull off this weekend in order to cut and reinstall. Same piece mirrored on drivers side. Everybody stating trimming a little felt, pulling back and trimming plastic, etc, gotta think this is something newer. It’s pretty thick steel, thinking it holds everything in that corner together.

 

[olyelr]

(4) very large bolts that are visible, going to try to pull off this weekend in order to cut and reinstall. Same piece mirrored on drivers side. Everybody stating trimming a little felt, pulling back and trimming plastic, etc, gotta think this is something newer. It’s pretty thick steel, thinking it holds everything in that corner together.

Sounds like it might dictate how much trimming can actually be done haaaaa