Lowered 21+ T1xx: Post Em Up

[BrokerThis]

@Johngm45 Got a grille shot?

 

[Johngm45]

here you go

 

[starbai]

ordered the belltech shocks. Was able to get the front done this week. I have a 4wd RST 3.0 Diesel. The instructions said 2 spacers, which did just about nothing for lowering. Went to one small spacer for the front. Also installed 24" reps.
Picture with tools is with instructions for 2 spacers.
View attachment 381187

@jordan11 , any chance you can share some more information on these reps? I've never seen em' before and love em'! Considering them for a Denali.

 

[jordan11]

Sure, here you go. eBay link

 

[WillyLT]

2022 Tahoe LT
Maxtrac 2” front lowering spindles
Maxtrac 3” adjustable struts
24x10 et27 snowflake reps on 305/35’s with 1/2” hubcentric spacers
View attachment 367248

Any issues with full wheel turning with the spindles any rubbing ?

 

[WillyLT]

If anyone is looking to lower their non-air-ride Tahoe, I have an extra set of Belltech springs (Part # 12462). One of the easiest ways to lower these is to swap the front springs to the rear and put these Belltech springs on the front. Brings it down about 2" all around and retains the factory rake of 3/4". I ordered an extra set on accident. They sell for approximately $220 online. I will sell mine for $100 plus shipping if anyone is interested.

Did you end up selling these ?

View attachment 381575View attachment 381575

that looks greattttt how do the bell techs ride and how was your camber alignment?

 

[WillyLT]

Just purchased couple weeks ago and immediately dropped off to my alterations guy. Specs...
2022 RST Diesel
Wheels are Black Rhino Kunene 22" (offset 10, so it pokes about 3/4" more than stock wheels)
Stock tires
Ceramic coated (used local Ceramic Pro dealer) - this is a MUST for black vehicles IMO
tinted front driver and passenger windows to match back windows
tinted orange front fender blinkers
tinted taillights
Lowered 2" front and back using Belltech adjustable struts
Removed Tahoe badging from sides
Removed RST and Duramax badging from tailgate (left Tahoe badging under tailgate window)
Installed smoked black aero skin on leading edge of hood

View attachment 367360

View attachment 367359

View attachment 367358

What’s the size of the rings you used front and back on the struts to get this perfect lowering level I need this asap .

 

[wendal]

22 Yukon Denali lowered with 2” front maxtrac drop spindles and 2.25 rear pro suspension lowering coils.
View attachment 384761

Where did you get this grille?????

 

[DaveLaz]

Any issues with full wheel turning with the spindles any rubbing ?

Yes, turning radius decreased, as well as rubbing but I’m not completely sure where the rubbing was happening be honest with you. Shortly after these photos were taken I put on a set of OEM 22’s and the turning radius improved a lot and I only have rubbing on the passenger side. However the 24’s will go back on soon with hubcentric spacers. Fingers crossed the turning radius and rubbing disappear. But if I have either of the two issues, or both, I’ll investigate and report back. Along with photos since I’ve done more to the truck. So stay tuned!

 

[WillyLT]

View attachment 381575View attachment 381575

What’s the ring set up for the front and rears to get that drop ?