BADRIDES
Full Access Member
- Joined
- Dec 18, 2015
- Posts
- 1,734
- Reaction score
- 1,148
$140 shipped and $277 shipped new on belltech site shipped.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Not bad. Trying to decide between the PPV springs. What's the part number on yours if you don't mind$140 shipped and $277 shipped new on belltech site shipped.
Yeah.. not sure how they can sag..never heard anything about sagging. I took mine out caused they rubbed the frame on the right side of my 02 Tahoe
I guess sagging may not be the correct term. The rear sitting lower than the front in due time instead of actually levelYeah.. not sure how they can sag..
Oh right. Gotcha. They usually can take close to a month to completely settle(depending on your driving)I guess sagging may not be the correct term. The rear sitting lower than the front in due time instead of actually level
Sent from my SAMSUNG-SM-G935A using Tapatalk
It would take years for a spring to sag. I dont think belltech makes products like that especially for what they cost.I guess sagging may not be the correct term. The rear sitting lower than the front in due time instead of actually level
Oh right. Gotcha. They usually can take close to a month to completely settle(depending on your driving)I guess sagging may not be the correct term. The rear sitting lower than the front in due time instead of actually level
Sent from my SAMSUNG-SM-G935A using Tapatalk
You can put a spacer in with the spring if its too low. Or just get springs that sit at the level you want.So you're saying if I level it with the beltech springs I'm still going to have to lower the front?
The guy with the PPV springs says his has a slight rake to it
Sent from my SAMSUNG-SM-G935A using Tapatalk