LT275/60R20 on factory wheels

[MN 15i XL Denali]

Just ordered a set of Nitto Ridge Grapplers in LT275/60R20. I know I could fit 285s but they were almost another $100 per tire since it is an “oddball size “. The 275s were $245 each and big enough for me and my factory chromes on a Rough Country leveling kit for Magneride.
I think this is a reasonable approach and answer to:
“how big can I go on factory 20s?”
Thoughts?

 

[SteveoTahoe]

I’m interested to see how these look, I’m of that same mind at the moment as far as tire size

 

[Countryboy07]

275/60/20 on stock 2015 20's. Perfect size in my opinion for a DD with stock gears.

 

[adventurenali92]

I went this route as well. I just scored a great Craigslist deal on a pretty new set of nitto dura grapplers. 275/60/R20, mounted on my NNBS Denali 20s. I didn’t have to make any changes to my truck as they fit with about a half inch clearance to the bottom corners of my bumper cover on either side. It’s a great set up.


I think the 275/60 is a great size on the 20. I feel so much less of the road and I feel like my truck is much more planted on the road. The dura grapplers are slightly louder with road noise, but that’s to be expected since they’re not the Michelin’s I just took off. Nothing to complain about as of yet.

 

[Demer]

Those look great!

 

[Doubeleive]

I like these goodyear eagle sport, best tires I have ever had and there not terribly expensive, goodyear will price match other retailers and they have a rebate most of the time.

 

[DenaliBQ]

275/60/20 on stock 2015 20's. Perfect size in my opinion for a DD with stock gears.

View attachment 188103
View attachment 188104
View attachment 188105

Those look really nice. Do you have a lift kit on there or just a level i bought 20" 16 OEM Denali wheels for my 2002 yukon with a level kit want to know if there is any rubbing ?

 

[Countryboy07]

Those look really nice. Do you have a lift kit on there or just a level i bought 20" 16 OEM Denali wheels for my 2002 yukon with a level kit want to know if there is any rubbing ?

Thank you! I'm just running a leveling kit and 1.5" coil spacers in th rear. No rubbing, every once in a while, it would rub the rear fender liner if articulating the rear axle. I ran the same size tires on 100% stock suspension as well with no rubbing.

 

[MN 15i XL Denali]

I’m a fan!

 

[MN 15i XL Denali]

Ordered a block for the back though because the front is a quarter inch taller at the wheel well with the RC level kit.