Nearly 4 years later, my 2001 Team DC Audio build

[Thatsquishykid717]

@wjburken @Sam Harris @Onebad1983 thanks guys that truly means a lot!! It’s been a long Road to where it’s at now. I just need to get more attention to detail on my paint. Aka need to take the time to cut and buff it. As of last Friday I have my own take home work truck now though so the Tahoe is not gonna be my during the week driver anymore. so that’s near the top on the list to get done. One thing I have been avoiding and need to stop avoiding

 

[Thatsquishykid717]

Woohoo front lip came in and is on. Had to trim about 1/4-1/2 in off the ends cause it was a little long. Since only the 05-06 lower valances have the mounts for these I had to use self tappers and zip ties to hold it on but it’s on there And seems sturdy. Gonna have to watch for the front lip now on curbs.

 

[Tonyrodz]

Woohoo front lip came in and is on. Had to trim about 1/4-1/2 in off the ends cause it was a little long. Since only the 05-06 lower valances have the mounts for these I had to use self tappers and zip ties to hold it on but it’s on there And seems sturdy. Gonna have to watch for the front lip now on curbs. View attachment 242595View attachment 242596View attachment 242597View attachment 242598View attachment 242599

I need that. Amazon?

 

[Sam Harris]

Woohoo front lip came in and is on. Had to trim about 1/4-1/2 in off the ends cause it was a little long. Since only the 05-06 lower valances have the mounts for these I had to use self tappers and zip ties to hold it on but it’s on there And seems sturdy. Gonna have to watch for the front lip now on curbs. View attachment 242595View attachment 242596View attachment 242597View attachment 242598View attachment 242599

Looks great! Man I’d rip that off in about 5 minutes [emoji1787]

 

[Thatsquishykid717]

I need that. Amazon?

I actually found it 20 bucks cheaper than amazon through theautopartsshop.com. Ordered it Friday morning and got here today. It was supposed to be delivered yesterday but still only took a couple days.

 

[Thatsquishykid717]

Looks great! Man I’d rip that off in about 5 minutes [emoji1787]

luckily i have had a lot lower vehicles before so hopefully I won’t rip mine off . my girl would kick my ass if I ever scraped her lowered tc’s lip on anything so I still get practice being careful when she lets me drive that she got her new wheels though it’s looking good

 

[Thatsquishykid717]

Not much of an update. Been mainly trying to gain on the meter with this thing. It’s been fighting me and doesn’t want to do 155 sealed. Testing testing and more testing. Gotten closer. added some 45’s in the enclosure to shrink it down a touch cause it’s a little big for what the subs want space wise. Also pulled the top of my dash off and put some sound deadener on the bottom of it. Might keep it from
Breaking more and less rattling this way. If Oregon goes into quarantine I’ll have a couple of weeks of being able to work on this thing though hahah. oh and if anyone was curious here is how I mounted the front lip

 

[Thatsquishykid717]

Got an update, feel like it’s been forever haha.

Front rotors have been shot for months now. Damn near getting death wobble while braking.

got an email from advance auto that they were having a sale so I ended up saving around 120 bucks doing it now.

full nnbs front brake setup
Ceramic pads, new calipers, and severe duty rotors. Definitely could feel the difference after the swap. Not absolutely insane difference of course but it is so much better and braking is smooth again.

also replaced my fuel filter. Glad I did because the output side was loose. Don’t think it was leaking but not the best thing to find. I changed it out so it’s purely my fault. Mistakes happen though just glad I found it.

 

[Miami-Dade]

Awesome work Jordan!! I love looking at it.

 

[Thatsquishykid717]

Awesome work Jordan!! I love looking at it.

thank you very much!