need help ASAP corvette servo

[josueh95]

i put on my corvette servo today i followed all the tutorials and it looks like everything was right..i went for a test drive and it wont go into second gear anymore when i got home i noticed i was leaking transmission oil and the o ring was loose..it looked good when i installed it what do you guys think it could be? i need help ASAP

 

[THE YETI]

Not a good sign. Get it to a transmission shop.

 

[josueh95]

i pulled the servo out to check if everything was right and tried putting it back in..this time it looked better and the o ring went all the way in and it looked perfect i went for another test drive and again it wud not go into second gear i noticed another trail of oil while i was driving and now im stuck on this..what could it be? i hope the entire transmission diddnt jst go to waiste im jst hopping for the best tomarrow il get it checked out by a transmission shop..

 

[Donnie Yukonie]

Best of luck man…. Btw I love your Hoe

 

[DaUsedMCR]

That sucks! Hopefully it'll be ok. I guess that's why it's sometimes good to have a shop do something, because if you do have problems, they are responsible for the install and will re-do it.

 

[doylee4693]

Please report back about the problem.I would like to know if its a problem with the actual product or if it wasnt installed properly!

 

[josueh95]

thanks guys so i went to a previous shop where my dad took his honda to get a rebuild trans so we know the guy pretty well i told him about what happened and if the case had cracked it would be pretty expensive..but i checked it and it looks good no cracks from what i could see..the metal o ring did pop out so im guessing that was the problem and it did not seal right he also said one of the seals might have not sealed right..if thats the case and the case did not crack hel fix it for 60 with new transmission oil..il take it tomarrow morning at 8 and hopefully everything goes well

 

[turq]

Good luck man

 

[josueh95]

the tahoe is in the shop and getting checked out..hopping for the best right now

---------- Post added at 11:51 AM ---------- Previous post was at 10:36 AM ----------

GREAT NEWS! soo in an hour i got a call that my tahoe was ready i went to the shop and they installed a new cover o ring and filled up the transmission with new oil..the oil alone would have been around the cost of what they charged me.

i did notice a firmer shift if the 1-2 and 2-3. defenetly not an issue with the product..it was just an installation error..the corvette servo did exactly what it described defenetly a good upgrade defenetly dodged a bullet there ive read other threads where bacause of a bad installation they needed a new tranny. im jst thankfull it did not turn into a nightmare.

 

[NathanJax]

sounds good... Glad it was only that.