Need mad help...

[DevinTheDude]

I have a 2008 Yukon Denali. I've seen the McGaughy 2/3 lowering kit but honestly thats not low enough for me. I was told you can put a 3/5 McGaughy kit on it but you would have to do some custom work. Does anyone have any other suggestions as to what kit or if i could even lower my denali with a 3/5. I have it on 26inch rims and i was wondering if they would rub from being lowered. Thanks for your time.

 

[Effeckt]

Welcome the forums first off. I'm not sure as I don't have a NNBS but I'm pretty certain that you have your facts correct. I seem to recall that the 2/3 fits without any changes but anything lower will take some work to fit. I will let the others chime in that have a little more knowledge with your body style though.

 

[NORCAL SS]

3/5 id go the lowest on it. ive done the belltech on them on 305 25 26 3/4 worked out great.

 

[iwaslowr]

I have a 2008 Yukon Denali. I've seen the McGaughy 2/3 lowering kit but honestly thats not low enough for me. I was told you can put a 3/5 McGaughy kit on it but you would have to do some custom work. Does anyone have any other suggestions as to what kit or if i could even lower my denali with a 3/5. I have it on 26inch rims and i was wondering if they would rub from being lowered. Thanks for your time.

Welcome to the forum!

I went with the Bell Tech 739SP kit and the only custom work involved trimming and using a heat gun to re-shape the plastic fender liners. The front fender lips behind the tires also needed to be slightly massaged with a rubber mallet. If you have shorter tires than my 305/30/26's the rubbing should be less of an issue... Here are pics of mine at 3/4.5





I just realized this was posted in the NBS section... moving it to the NNBS section instead may get others with 07+ hoes/kons to chime in.

 

[DevinTheDude]

Yo... Thanks for the help fellas... I'm going to post it up again in the right section this time. Your drop looks hella clean man. Looking forward to doing that. I have Vellano wheels as well. Hella dope!!! Real rim shit right there.

 

[fatnlowtahoe504]

post pics of your truck, i wanna see!!!