Need your break-in skills 2003 Chevy 4x4 Sierra.

[Kgitti]

Jamming the door cracked open like that puts a lot of stress on the latch. Have you tried a stout wire with a loop to see if you can pull the inside door pull while it's cracked open at the top of the door?

It was fine and did no damage to the truck.

 

[Rocket Man]

I am new to this site and can’t seem to delete a whole post. Is that alright what I did?

Yep.

 

[Rocket Man]

It’s easier if the handle is still attached but you’ll figure out which one is the lock/unlock rod. Once that’s moved then the handle should be able to be pulled, or the rod that attached to it.

 

[Kgitti]

"B" is the rod that goes to the release handle on the door; it should go to the left (away from the latch) to activate. But "A" needs to be in the unlocked position, and I'm pretty sure that's also to the left (away from the latch).

Move B to the left, and if that doesn't work, move A one way or the other to see if it will unlock it. Then try moving B again.

So I got it open!
It’s A to the left, B to the left, C up and then D down.

 

[Kgitti]

THANK YOU ALL FOR THE HELP. You’ve been great!

 

[Rocket Man]

Awesome outcome and thanks for coming back with the follow-up.

 

[ivin74]

THANK YOU ALL FOR THE HELP. You’ve been great!

Post some pictures of the truck!!