New guy need help lowering 3/3.5 belltech 95 4x4 2 door ty pictures would be great

[95gmcc10]

new guy need help lowering my 4x4 2 door 3/3.5 or 3/2 belltech pictures would be great ty

 

[Joseph Garcia]

Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Folks with direct answers to your question will chime in.

 

[97YukonNZ]

new guy need help lowering my 4x4 2 door 3/3.5 or 3/2 belltech pictures would be great ty

Hi
Welcome to the forum from N.Z
I have a 97 Yukon.
Look up my thread build.
Have done a passive 1" wind down in the front torsion and 2" rear shackle drop. Looking at your ride height looks like you may have a body lift as well,if so removing that will give you maybe a couple inches drop!

 

[95gmcc10]

Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Folks with direct answers to your question will chime in.

Ty sir

 

[95gmcc10]

Hi
Welcome to the forum from N.Z
I have a 97 Yukon.
Look up my thread build.
Have done a passive 1" wind down in the front torsion and 2" rear shackle drop. Looking at your ride height looks like you may have a body lift as well,if so removing that will give you maybe a couple inches drop!

Ty sir no body lift

 

[97YukonNZ]

Oh okay,here is my ride height as I bought it sitting on 16×10" M/T rims. 2nd picture with torsion wound down 1" in the front and 2" lowered shackles in the rear.

 

[95gmcc10]

Nice ride