New rear endlinks for lowered Suburban?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Fsuhammond

TYF Newbie
Joined
Sep 8, 2014
Posts
25
Reaction score
16
Sorry to hear. Wonder what is different or went wrong. I purchased my drop kit from Tony and am riding 26s on my Escalade. No issues. Rides great. Your drop does seem more aggressive. Maybe that's the difference. Not sure.

View attachment 247205 View attachment 247206 View attachment 247207

I don’t believe the drop has anything to do with my issue, pretty sure it’s the wheels and tires. The only thing that has me concerned with the drop at all was the angle that the rear sway bar is in now.
 

Fsuhammond

TYF Newbie
Joined
Sep 8, 2014
Posts
25
Reaction score
16
Installed the djm endlinks last week. Needless to say the truck didn’t like them much. Before it’s asked, yes I moved the bracket over and aligned it correctly. Lol. Djm is sending a replacement, but I doubt I’ll waste time putting them back in.

846658CD-166F-473C-8565-12B625E71816.jpeg 8B8C01CA-03BD-4450-B2EF-1BA951EC0B67.jpeg
 

EZ Money

Member
Joined
May 17, 2019
Posts
61
Reaction score
45
tony, told me to shorten the rods to bring it down. I’m at 2.95 and he said to try 2.75 and 2.50.

did this do the trick? I had a local shop lower my ‘19 yesterday. It went down a full 2” in the front. The rear is supposed to be 4” but it only went down about 1.5”. They said it would settle...not 2.5” I said!
 

EZ Money

Member
Joined
May 17, 2019
Posts
61
Reaction score
45
So i pulled the rods and they were 3.5" long! I trimmed them to just under 3" long and it dropped the truck another 1.5" in the back. I am going to see how the rear springs settle over the next week. Next weekend I will trim the rods to get it down to a full 4" drop in the rear.
At least for now it isn't nose-diving!
 

Fsuhammond

TYF Newbie
Joined
Sep 8, 2014
Posts
25
Reaction score
16
did this do the trick? I had a local shop lower my ‘19 yesterday. It went down a full 2” in the front. The rear is supposed to be 4” but it only went down about 1.5”. They said it would settle...not 2.5” I said!

sorry, I haven’t checked this site in a couple weeks. I ending up at 2.65” and it was a full 4”
 

EZ Money

Member
Joined
May 17, 2019
Posts
61
Reaction score
45
sorry, I haven’t checked this site in a couple weeks. I ending up at 2.65” and it was a full 4”

I ended up trimming a little more. They are right at 2.7" and the rear dropped the full 4". It looks amazing!
 

Salvatore Fazzina

TYF Newbie
Joined
Jun 2, 2021
Posts
10
Reaction score
2
Am I going to need new ones when I lower my 2019 Suburban? I hear the rear sway bar will be in the wrong position when lowered. I’m in stalling Hotchkis front and rear sways at the same time. It comes with new endlinks for the front. Not the rear. I’m doing a 2/3 drop. Can’t find much info if it’s needed. Thanks.
 

Attachments

  • 34324.pdf
    817.4 KB · Views: 4

Salvatore Fazzina

TYF Newbie
Joined
Jun 2, 2021
Posts
10
Reaction score
2
I just bought and installed a belltech 2/3-4 setup from tony. I’ve seen mixed posts about needing the end links. Some people say it’s needed, however tony said no. I setup my Escalade esv 2/4 and have only settled out to 1/2.5. I have a feeling the air sensors are limiting my drop for sure.

View attachment 246674
 

Attachments

  • 34324.pdf
    817.4 KB · Views: 3

Forum statistics

Threads
132,320
Posts
1,865,925
Members
96,911
Latest member
1stYukonXL
Top