Newbie lowering help.

[BennyR72]

Newbie to the forum and to lowering looking for some help.

Want to give somewhere between a 2/2 and 3/5 drop on my 96 2DR FWD hoe. If I were to crank the torsion bar down in the front and remove a leaf from the rear would that work and if so what problems might I have? Also what other inexpensive options are there?

Never dropped a truck before so I'm kinda flying blind here, any help is appreciated. Thanks

 

[Da90]

For the rear I would get 2" lowering shackles. I think they are like $20 at auto parts stores. If not you can find them online for 20-40$.

Cheap mods would be color match your front Bowtie and take off all molding and emblems!

 

[BennyR72]

Already blacked out the grill and bowtie, took off all the molding and badges. So if i went with the lowering shackles for the rear instead of removing a leaf and just cranked down the torsion bar for the front you think that would work well and still give me a decent ride?

 

[718frankb]

stock keys will only give you about an inch of drop.belltech keys will give you up to 1-3 inches of drop.the rear can be done a number of ways: 2 in shackles=2in drop ,2 in shackles and 4door drop hangers redrilled for 2 door=3 1/2 drop or drop leaves and 2in shackles= 5 in drop. lower than 5in you need a c notch