Newest PPV Owner

[justsethpc]

I recently acquired a 2011 PPV with 132k Miles on it. It has a few problems that need addressed but overall in the 3 days I've had it, I'm very happy with it. Of course my stupid self, I have no pictures of it right now, except with the wrap it had from the previous place. I guess to go down the list of broken sh*t, Driver side motor mount trashed, front blower motor aggressively disassembled itself in my hand, I THINK it has a Cyl 1 lifter tick, LR door lock doesn't work, and good lord this all metal center console SUCKS!!!!! But, I mean even if the lifter is bad, its still not bad for a free truck lol.

**EDIT**
BTW I dont know who needs to hear this, but removing old Vinyl wraps f-inkg sucks.

 

[OR VietVet]

Welcome to the forum from Oregon.

 

[justsethpc]

This really does suck.

btw anyone looking to buy a police center console??

 

[mikez71]

What's bad about the metal console?
I was thinking they maybe useful if I you needed to install a scanner/cb radio or some other electronic equipment..

Looking damn good for free! Take more pics if you get the chance!

 

[89Suburban]

This really does suck.

btw anyone looking to buy a police center console??
View attachment 434307

Welcome, did you try using a heat gun on the vinyl?

 

[mountie]

I recently acquired a 2011 PPV with 132k Miles on it. It has a few problems that need addressed but overall in the 3 days I've had it, I'm very happy with it. Of course my stupid self, I have no pictures of it right now, except with the wrap it had from the previous place. I guess to go down the list of broken sh*t, Driver side motor mount trashed, front blower motor aggressively disassembled itself in my hand, I THINK it has a Cyl 1 lifter tick, LR door lock doesn't work, and good lord this all metal center console SUCKS!!!!! But, I mean even if the lifter is bad, its still not bad for a free truck lol.

**EDIT**
BTW I dont know who needs to hear this, but removing old Vinyl wraps f-inkg sucks.

Welcome from SE Florida...... ( Lots of those PPV's around here )......
Have you contacted a wrap installer for removal advice??

 

[justsethpc]

What's bad about the metal console?
I was thinking they maybe useful if I you needed to install a scanner/cb radio or some other electronic equipment..

Looking damn good for free! Take more pics if you get the chance!

The worst part is no cup holders, no arm rests, and just bleh, i hate the way it looks lol. and yeah when i get off in a few hours ill post some.

 

[justsethpc]

Welcome, did you try using a heat gun on the vinyl?

Yeah, yesterday while it was 102 degrees out I was using the heat gun and made some good progress. The roof is the worst because its been wrapped since 2011, and its brittle and cracked and comes off in little pieces, then its hot as hell outside, add in the heat from the heat gun, and then when you get parts of the wrap off its blinding staring at the white roof in sunlight lol. so overall the actual task of removing the wrap isn't bad, its just everything else that makes it suck.

 

[OR VietVet]

Yeah, yesterday while it was 102 degrees out I was using the heat gun and made some good progress. The roof is the worst because its been wrapped since 2011, and its brittle and cracked and comes off in little pieces, then its hot as hell outside, add in the heat from the heat gun, and then when you get parts of the wrap off its blinding staring at the white roof in sunlight lol. so overall the actual task of removing the wrap isn't bad, its just everything else that makes it suck.

So, the primer looking spot on the hood is where the white paint came off too?

 

[justsethpc]

So, the primer looking spot on the hood is where the white paint came off too?

yeah, the place i got it from unwrapped the hood and that's literally the only spot where the paint is messed up. So I just have the one primer spot to handle and repaint.