I have tried to Google the subject, and have searched this forum for answers, but no luck.
Factory radio, with a non-working factory cd-player in the center console.
Factory amp. Everything at the amp is connected.
I only have sound coming from the front door speakers and the sub.
Both rear doors and rear pillar tweeters are dead.
The center console is not the factory one, so I don't know if the truck was ever delivered with rear audio controls. There is a harness and connector under there, but the connector doesn't look like the correct one for rear audio...?
See picture 1 of the connector next to the accelerator pedal.
The cd-player is plugged in, but as I mentioned - malfunctioning.
On the back of the factory unit I have two harnesses plugged in.
Probably main harness and cd-player. See picture 2.
I also have a loose connector that I don't know what is or where should be..
It's a female connector, and it fits right on to the cd-player connector.
If I unplug the cd-player connector and plug it in the loose one there is no change. See picture 3.
What are these connectors?
Do you have any tips to where I should start looking?
Thanks
Kai
Factory radio, with a non-working factory cd-player in the center console.
Factory amp. Everything at the amp is connected.
I only have sound coming from the front door speakers and the sub.
Both rear doors and rear pillar tweeters are dead.
The center console is not the factory one, so I don't know if the truck was ever delivered with rear audio controls. There is a harness and connector under there, but the connector doesn't look like the correct one for rear audio...?
See picture 1 of the connector next to the accelerator pedal.
The cd-player is plugged in, but as I mentioned - malfunctioning.
On the back of the factory unit I have two harnesses plugged in.
Probably main harness and cd-player. See picture 2.
I also have a loose connector that I don't know what is or where should be..
It's a female connector, and it fits right on to the cd-player connector.
If I unplug the cd-player connector and plug it in the loose one there is no change. See picture 3.
What are these connectors?
Do you have any tips to where I should start looking?
Thanks
Kai