o2 sensor question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

97blueyuk

Member
Joined
May 5, 2013
Posts
74
Reaction score
2
Okay so my p0430 code came back. I am trying to swap the sensors side to side. I have the sensor sockets, but am having quite a bit of trouble with the bank 1 sensor, not much room to work around there. Any tips or advice??

thanks
 

saif najd

Full Access Member
Joined
Dec 25, 2012
Posts
567
Reaction score
0
I wish if I there is an emulator for this sensor I have the same code daily

Sent from my GT-I9505 using Tapatalk 2
 

kcb37

Full Access Member
Joined
Oct 31, 2013
Posts
169
Reaction score
0
Did you get it out?
I do not own a O2 wrench or socket.
I have always used a regular wrench, cresent wrench, or when they are real tight a pipe wrench.
 

saif najd

Full Access Member
Joined
Dec 25, 2012
Posts
567
Reaction score
0
Did you get it out?
I do not own a O2 wrench or socket.
I have always used a regular wrench, cresent wrench, or when they are real tight a pipe wrench.

Me no, I had an accident so every thing is on hold :(

Sent from my GT-I9505 using Tapatalk 2
 
OP
OP
97blueyuk

97blueyuk

Member
Joined
May 5, 2013
Posts
74
Reaction score
2
actually, the one that was throwing the code was the one i thought would give me the most problem. I did get that one out pretty easily. The other one was giving me problems. The o2 sensor was only 30-35 bucks from amazon so i figured put a new one in, instead of fighting with and possibly ruining a bad one too.

i got it out after soaking it with liquid wrench, letting the truck run for about 5 mins and using the o2 socket.
 

LA SILVERBIRCH

TYF Newbie
Joined
Oct 30, 2013
Posts
9
Reaction score
0
Im getting that same code on my 99 2 door tahoe the o2 sensors were replace about a month ago i am thinking that i have a clogged up catylitic converter because it feels very slugish as if i was dragging an anchor at but only at wide open throttle.
 

saif najd

Full Access Member
Joined
Dec 25, 2012
Posts
567
Reaction score
0
Im getting that same code on my 99 2 door tahoe the o2 sensors were replace about a month ago i am thinking that i have a clogged up catylitic converter because it feels very slugish as if i was dragging an anchor at but only at wide open throttle.

I feel the same and my catylitics are empty :D

Sent from my GT-I9505 using Tapatalk 2
 

LA SILVERBIRCH

TYF Newbie
Joined
Oct 30, 2013
Posts
9
Reaction score
0
i feel the same and my catylitics are empty :d

sent from my gt-i9505 using tapatalk 2

deleted my cats, did new ac delco plugs and wires with rotor and cap also did new fuel filter cleaned the throttle body and did some seafoam in the vaccum hose that goes to the booster and i gots to say that it feels 100 times better.
 

saif najd

Full Access Member
Joined
Dec 25, 2012
Posts
567
Reaction score
0
deleted my cats, did new ac delco plugs and wires with rotor and cap also did new fuel filter cleaned the throttle body and did some seafoam in the vaccum hose that goes to the booster and i gots to say that it feels 100 times better.

Sea foam!!!

What is the story with the sea foam please tell,

Sent from my GT-I9505 using Tapatalk 2
 
Top