Oil change at dealer, recall, V4 is now disabled. 2020 Yukon XL Denali

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bartok

TYF Newbie
Joined
Aug 21, 2022
Posts
11
Reaction score
12
2020 Yukon XL Denali
Went to the dealership on 7/18 for their oil change special. About 45 min later I check in to see if they were done and the service advisor said the tech was taking care of a recall. I was not aware there was a recall - no letter or other communication.

Today we left on vacation and about an hour in I scrolled the display to the economy section. It was on V8. Watched it for the rest of the drive, slow/fast/hills/etc and it stayed on V8 the entire time. Last time I checked this was last week and V4 was active.

Is there a recall on this model that would affect this, or is GMC just reprogramming to delete V4 mode? Or…?
 

Mean_Green

Full Access Member
Joined
Mar 23, 2023
Posts
411
Reaction score
537
Did you ask them what the recall was and why they did it without asking you first?
 

CMoore711

Full Access Member
Joined
Jul 18, 2017
Posts
1,286
Reaction score
1,101
Look at your service ticket and receipt paperwork for your last visit that has the oil change and recall on it. There should be a recall number and/or description of the recall they performed.

I highly doubt any recall performed at a dealer would deactivate AFM.
 
OP
OP
B

bartok

TYF Newbie
Joined
Aug 21, 2022
Posts
11
Reaction score
12
Left a message for the service advisor and haven’t heard back. Will check paperwork and call again on Monday. Did another 100+ miles today and still no V4 at any t8me. This could be good, right?
 

B-train

Full Access Member
Joined
Sep 12, 2022
Posts
2,269
Reaction score
3,902
Very good indeed I would say. As long as it was only a software flash
 

Miami-Dade

Staff member
Super Moderator
Supporting Member
Joined
Dec 8, 2016
Posts
3,856
Reaction score
4,822
Left a message for the service advisor and haven’t heard back. Will check paperwork and call again on Monday. Did another 100+ miles today and still no V4 at any t8me. This could be good, right?
I have no idea why you are even calling them. You are Blessed and do not know it.

Anyone on this forum would love to have no V4 mode after a oil change at the dealer. Not one of them would complain.
 

SpyShops212

Full Access Member
Joined
Jan 29, 2022
Posts
372
Reaction score
348
I would either do the litter removal because when the lifters are going back and forth from v4 to v8 mode they are functioning. There are members on forums that still have lifter failure with the range device.
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,607
Reaction score
26,321
Location
Treasure Coast, Florida
2020 Yukon XL Denali
Went to the dealership on 7/18 for their oil change special. About 45 min later I check in to see if they were done and the service advisor said the tech was taking care of a recall. I was not aware there was a recall - no letter or other communication.

Today we left on vacation and about an hour in I scrolled the display to the economy section. It was on V8. Watched it for the rest of the drive, slow/fast/hills/etc and it stayed on V8 the entire time. Last time I checked this was last week and V4 was active.

Is there a recall on this model that would affect this, or is GMC just reprogramming to delete V4 mode? Or…?

That's a blessing man, leave it!
 

Forum statistics

Threads
132,366
Posts
1,866,783
Members
96,987
Latest member
Chineyfari
Top