Oil cooler lines leak?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

992door

Full Access Member
Joined
Apr 30, 2009
Posts
1,589
Reaction score
20
Location
Greenville, NC
Did you put the o-rings on the hoses when you replaced them and are they seated good in the fitting?
 

992door

Full Access Member
Joined
Apr 30, 2009
Posts
1,589
Reaction score
20
Location
Greenville, NC
Just to make sure we are taking the same thing. You replaced the 2 hoses that run into the radiator?
 

992door

Full Access Member
Joined
Apr 30, 2009
Posts
1,589
Reaction score
20
Location
Greenville, NC
OK I am pretty sure that there should have been o-rings to go on the connections. Sunlit would probably know for sure whether they should have them.
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
there are orings used on each line where the lines enter the radiator and there should be internal orings on the fittings where the rear portion of the lines snap into the quick disconnect. the ones in front are available individually for a $1 or 2 each from a dealer and those should have bee included with the lines. the one in the back the whole fitting must be replaced. those are about $8-10 each gm 15043741.

---------- Post added at 07:48 PM ---------- Previous post was at 07:46 PM ----------

4wd version shown. only difference between the 2wd should be the adapter orientation.
http://www.genmotorinfo.com/Picture...S+(L30/5.0M,L31/5.7R)+-+K+&pid=960515TC01-018
 
OP
OP
4myfreedom

4myfreedom

Full Access Member
Joined
Jan 30, 2013
Posts
210
Reaction score
23
Location
Washington, DC
No have to take my bros yukon off the lift. New engine install will keep you posted. sorry its is so slow
 

Forum statistics

Threads
132,780
Posts
1,874,216
Members
97,623
Latest member
richardault
Top