Diesel6point6
TYF Newbie
- Joined
- Sep 1, 2020
- Posts
- 26
- Reaction score
- 26
What an engineering fail! The drain bolt was stripped so I figured not knowing if the filter has ever been changed I'd do it while I was under there. In my Dmax it's a 30 minute job so I figured this would be similar. Nope. I fought with this damn pan all freaking day long and took many unwanted fluid baths. Those who have done it may know what I'm talking about but the pan doesn't clear the shift cable so it can't just drop straight down like planned. I finally got it by using some channel locks to bend the cable bracket just enough for it to clear. But many four letter words were used, and a few breaks were needed to cool down before I sent a tool flying. Never again will that tranny pan be dropped.
My rant is over. Just wanted to hopefully feel better and know I'm not the only one who experienced this nightmare
My rant is over. Just wanted to hopefully feel better and know I'm not the only one who experienced this nightmare