Open element air filter 350 TBI

[95escahoe]

I am thinking about running an open element air filter on my 350 TBI what are the pros and cons, any pics of setups your using and links to the parts used

Sent from my HTC One X using Tapatalk 2

 

[Gzes]

Im running an eddlebrock air cleaner. Since your tbi and running 2 stud go ti the junkyard and get the 1 stud from an older tbi. It just unturns n comes out.

---------- Post added at 10:15 PM ---------- Previous post was at 10:13 PM ----------

 

[95escahoe]

Im running an eddlebrock air cleaner. Since your tbi and running 2 stud go ti the junkyard and get the 1 stud from an older tbi. It just unturns n comes out.

Any link to the setup your using?

Sent from my HTC One X using Tapatalk 2

 

[Gzes]

PROS. better.mpg, looks good, and cleans up engine bay
CONS. Water can get in and make it run like shit. I went boggin and had that problem. The filter gets dirty faster. It can clog faster.

---------- Post added at 10:17 PM ---------- Previous post was at 10:16 PM ----------

Mine is jusy a 14in plate with i believe a 3in tall filter. Shoulda got a 4in. Super easy to do tho just unsrew the 2 studs then screw in the junkyard single stud in the middle

---------- Post added at 10:20 PM ---------- Previous post was at 10:17 PM ----------

Good link http://www.fullsizechevy.com/forum/...uble-wing-nut-open-element-air-cleaner-2.html

 

[95escahoe]

Thanks for the info

Sent from my HTC One X using Tapatalk 2

 

[Gzes]

No problem. Tooke me forever to figure out you cpuld convert to one stud. Was gonna end up paying coupel hundred for a 2 stud qnd they only came in chrome

 

[95escahoe]

No problem. Tooke me forever to figure out you cpuld convert to one stud. Was gonna end up paying coupel hundred for a 2 stud qnd they only came in chrome

Lol ya I saw that one around before not big chrome fan either lol

Sent from my HTC One X using Tapatalk 2

 

[SunlitComet]

or spend some bucks and gains some power in the process.

www.amazon.com/dp/B000BR1QBE/

 

[95escahoe]

or spend some bucks and gains some power in the process.

www.amazon.com/dp/B000BR1QBE/

Been debating that too cause the open element is prolly 100 or less havent looked yet and for some extra cash that would look better and perform better

Sent from my HTC One X using Tapatalk 2

 

[retorq]

Drop base, Not sure how tall the filter is, K+N xtreme flow top, single stud, it's easier to just go get threaded rod from Home Depot, bend and cut the thing yourself. I remounted my coil to the firewall, I recall that was an issue at one point.