SSGUNNER
Full Access Member
- Joined
- Jun 10, 2021
- Posts
- 344
- Reaction score
- 221
Got the OTA update 2 weeks ago for my 2021, got home, parked and went about my day and has been fine no issues.
OTA Update on 2021 Yukon Denali seems to have bricked my truck
- Thread starter jimmybeers
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Same but I always hold my breath when I complete the first start after the update.
R32driver
Full Access Member
- Joined
- Nov 24, 2021
- Posts
- 721
- Reaction score
- 631
Same here except it was just yesterday. It took maybe 4 minutes to complete and I’ve noticed zero change with anything
i'm sure almost all ota updates will go perfectly, but it's that small percentage that have a problem like anything
all it takes is a voltage drop during the process and wammo instant problem
all it takes is a voltage drop during the process and wammo instant problem
B520044
Full Access Member
- Joined
- Sep 3, 2020
- Posts
- 328
- Reaction score
- 234
My OTA update/d yesterday. NO issues and nothing seems to have changed....
Pro299
Full Access Member
- Joined
- Jun 17, 2021
- Posts
- 127
- Reaction score
- 95
Ran the OTA last night. First startup this morning was several seconds longer than usual and stumbled before smoothing out. Subsequent starts were a second or two longer than before, but seems to run OK.
‘22 Escalade- The OTA update did its thing and then wouldn’t recognize any key fob and every light was on. I had to disconnect the battery for 15 min and then everything was fine. It was like Kathrine fired up the microwave and it forgot it’s name!?!
Thomas Schneider
Member
I got the OTA update notification several weeks ago and started the update which looked like all was going well and left the vehicle. I came back later and saw this on the screen:
So I waited a day or so and tried again; same notification. I did this several times now... same-same. So I disconnected the battery for 10 minutes to see if a re-boot would work, no such luck, so it looks like a dealer trip in the future. Anyone else have this happen??
So I waited a day or so and tried again; same notification. I did this several times now... same-same. So I disconnected the battery for 10 minutes to see if a re-boot would work, no such luck, so it looks like a dealer trip in the future. Anyone else have this happen??
oldretiredafguy
Member
This is why I keep and drive my "old" trucks
1. 1991 Suburban 4x4
2. 1988 Suburban 4x4
3. 1988 V-Jimmy
4. 1986 C2500
5. 1983 C2500 Crew Cab
All the updates they need is fresh gas and oil.
1. 1991 Suburban 4x4
2. 1988 Suburban 4x4
3. 1988 V-Jimmy
4. 1986 C2500
5. 1983 C2500 Crew Cab
All the updates they need is fresh gas and oil.
