P1639 P1635 and ecm b fuse blowing

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

opiefavors

Member
Joined
May 7, 2013
Posts
51
Reaction score
0
My 2000 yukon xl 2500 is having some issues. I have both codes of P1639 and P1635. Also the ecm B fuse keeps blowing.

I know the ecm B fuse has to do with the fuel pump but what else is on this circuit? A friend said its the fuel pump but Im not one to just go replacing parts.(the pump is quite loud though, pretty sure I'll be replacing it soon anyways.

This truck is my daily at the moment and I really need it to be reliable. Thanks.
 

SLCHOE

ASE Master Certified + (L1)
Joined
Nov 28, 2013
Posts
807
Reaction score
52
Location
Midvale, Utah
Disconnect the fuel pump relay and put in a new 30A ECM B fuse. Turn the key. If the fuse still blows, there is a problem with your ECM and specifically the 5V reference circuit driver shorting to ground internally.

dLAc0z1.png

If this is the case, there is a chance that the ECM is ok but one of the sensors being fed the 5V or shorted to ground.

The next step:

ncCim0f.png

Disconnect all of these sensors:

  • MAP sensor
  • EGR valve
  • Throttle position (TP) sensor
  • Fuel level sensor
  • Fuel tank pressure sensor
 
Last edited:
OP
OP
O

opiefavors

Member
Joined
May 7, 2013
Posts
51
Reaction score
0
The fuse dosnt blow instantly. It blows after driving for about a day. Its random. Also the codes come and go as they please lol.
 
OP
OP
O

opiefavors

Member
Joined
May 7, 2013
Posts
51
Reaction score
0
How do I check all those sensors. What does disconnecting them do?

Sorry if I sound stupid. Electronics and sensors are not my thing.
 

SLCHOE

ASE Master Certified + (L1)
Joined
Nov 28, 2013
Posts
807
Reaction score
52
Location
Midvale, Utah
How do I check all those sensors. What does disconnecting them do?

Sorry if I sound stupid. Electronics and sensors are not my thing.

Disconnecting them takes them out of the scenario. Adding them one by one will tell you which one (or possibly ones) are your issue (the fuse will blow).

You say it takes time to blow the fuse so this simple approach probably wont work if it's not intantly blowing at key on.

Based on what I gather from your situation, it needs to go to a shop with a sharp tech with a scope. You wont be able to DIY this one. Too many variables involved and special (and expensive) tools needed to do the proper diagnostic. Even with all of that, it may take some time to figure out.
 
OP
OP
O

opiefavors

Member
Joined
May 7, 2013
Posts
51
Reaction score
0
Thats what i was figuring. That sucks. Cause i dont have the extra money for it at the moment.
 

Forum statistics

Threads
132,196
Posts
1,863,781
Members
96,712
Latest member
NH-Yukon

Latest posts

Top